Window stabilizer/felt help ASAP
Thread Starter
Member
iTrader: (4)
Joined: Mar 2009
Posts: 399
Likes: 0
From: Gonzales, LA
Car: 85 Camaro Z28
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: 3.42
Window stabilizer/felt help ASAP
I have ordered new inner and outer window sweeps and I figured I would replace the felt stabilizers while I am in there.... old ones are dried up and crappy feeling.... My question is... Classic Industries is showing two different versions of these.... I have a 1985 Z28.... will the cheaper of the two work on my doors?.... or not..... also if someone knows a cheaper place these can be had brand new lmk.....
88-92 version
http://www.classicindustries.com/cam.../10198277.html
82-87 version
http://www.classicindustries.com/cam.../20192983.html
88-92 version
http://www.classicindustries.com/cam.../10198277.html
82-87 version
http://www.classicindustries.com/cam.../20192983.html
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: Window stabilizer/felt help ASAP
I have ordered new inner and outer window sweeps and I figured I would replace the felt stabilizers while I am in there.... old ones are dried up and crappy feeling.... My question is... Classic Industries is showing two different versions of these.... I have a 1985 Z28.... will the cheaper of the two work on my doors?.... or not..... also if someone knows a cheaper place these can be had brand new lmk.....
88-92 version
http://www.classicindustries.com/cam.../10198277.html
82-87 version
http://www.classicindustries.com/cam.../20192983.html
88-92 version
http://www.classicindustries.com/cam.../10198277.html
82-87 version
http://www.classicindustries.com/cam.../20192983.html
JamesC
Thread Starter
Member
iTrader: (4)
Joined: Mar 2009
Posts: 399
Likes: 0
From: Gonzales, LA
Car: 85 Camaro Z28
Engine: 5.7 TPI
Transmission: 700R4
Axle/Gears: 3.42
Re: Window stabilizer/felt help ASAP
through them, yes I did see that, however I found another source for them.... Just want to know if the cheaper ones will work on my model.
Joined: Aug 1999
Posts: 19,282
Likes: 103
From: Lawrence, KS
Car: Met. Silver 85 IROC/Sold
Engine: 350 HO Deluxe (350ci/330hp)
Transmission: T-5 (Non-WC)
Axle/Gears: Limited Slip 3.23's
Re: Window stabilizer/felt help ASAP
While I can't say with certainty that they will fit, I can say that GM made some improvements to the doors around 88, so the cheaper versions may actually be the best choice. Check the pic of this 88 (sure looks like the earlier version).
JamesC
JamesC
Last edited by JamesC; Mar 7, 2011 at 06:07 PM.
Thread
Thread Starter
Forum
Replies
Last Post








