Katzkin leather seat fitting well?
Thread Starter
Joined: Jun 2010
Posts: 648
Likes: 0
From: San Antonio, TX
Car: 1982 Camaro Berlinetta
Engine: GM crate motor Goodwrench 5.7 350
Transmission: 700R4
Axle/Gears: 3.23
Katzkin leather seat fitting well?
So after replacing the hardware on both seats and them starting to fall apart I think its time to replace them entirely. I remember looking at Katzkin when I first got the car. Anyways, they only do as early as '88 Camaros. Are they the same size etc? Or has anyone bought from them and have pros cons?
Member
iTrader: (4)
Joined: Jan 2002
Posts: 257
Likes: 1
From: Laurel MD 20707
Car: 91 Camaro RS
Engine: GM PP crate 350
Transmission: 700r4
Axle/Gears: 3:42 spooled 10 bolt
Re: Katzkin leather seat fitting well?
katzkin did my heated bucket seats in my 2013 Sonata.They did perforated black leather , seats came out better than stock.
Thread Starter
Joined: Jun 2010
Posts: 648
Likes: 0
From: San Antonio, TX
Car: 1982 Camaro Berlinetta
Engine: GM crate motor Goodwrench 5.7 350
Transmission: 700R4
Axle/Gears: 3.23
Re: Katzkin leather seat fitting well?
thats good to know. It took me a minute to see the price on them and it hurt just to look. but anyone who has used them has said it's worth it. but $2000+ is a lot of change for some seats haha
Senior Member
Joined: Jun 2011
Posts: 839
Likes: 4
From: Melbourne, Australia
Car: 1988 IROC Camaro (RHD)
Engine: 350 ci L98 SBC
Transmission: T700
Axle/Gears: 9 bolt BW, Disk, Posi-traction
Re: Katzkin leather seat fitting well?
Check out lethalinteriors@mediacombb.net , the woman who does a lot of F body interiors.
She's mentioned on this board a bit and comes recommended.
She quoted me a price less than half that in leather. I'm just waiting for my car to come back from the paint shop until I get an interior from her.
She's mentioned on this board a bit and comes recommended.
She quoted me a price less than half that in leather. I'm just waiting for my car to come back from the paint shop until I get an interior from her.
Supreme Member
iTrader: (4)
Joined: Aug 2003
Posts: 2,708
Likes: 15
From: NYC
Car: 1982 Recaro TA, 1989 TTA#948
Re: Katzkin leather seat fitting well?
I had Katzkin leather installed in my Pathfinder when I bought it new, 7 years ago. It still looks good. The leather is heavy and the finish is durable, unlike some of the leather that came on these cars when new.
COTM Editor
iTrader: (11)
Joined: Mar 2006
Posts: 4,098
Likes: 13
From: WINDSOR, CO
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Re: Katzkin leather seat fitting well?
Check out lethalinteriors@mediacombb.net , the woman who does a lot of F body interiors.
She's mentioned on this board a bit and comes recommended.
She quoted me a price less than half that in leather. I'm just waiting for my car to come back from the paint shop until I get an interior from her.
She's mentioned on this board a bit and comes recommended.
She quoted me a price less than half that in leather. I'm just waiting for my car to come back from the paint shop until I get an interior from her.
I looked into a Katskin kit years ago when I redid the interior on the 91, and at the time they had no installed pics... just prices! I ended up using Mr.Mikes.com for my leather and door panel and it was still spendy, but much less than Katskin... enough I could door my door panels and ordered new subs. I think that Katskin now has such a name that your paying for some of that name in the price. They do offer some neat double stitching options and suedes that you might not has the option to do with other kits.
I would honestly call Princess at Lethal and see what type of stuff she may be able to do for you. You got nothing to lose by calling her.
Thread Starter
Joined: Jun 2010
Posts: 648
Likes: 0
From: San Antonio, TX
Car: 1982 Camaro Berlinetta
Engine: GM crate motor Goodwrench 5.7 350
Transmission: 700R4
Axle/Gears: 3.23
Re: Katzkin leather seat fitting well?
I just ordered a kit from "Covergirl" for my 92, and I cannot wait to get them!
I looked into a Katskin kit years ago when I redid the interior on the 91, and at the time they had no installed pics... just prices! I ended up using Mr.Mikes.com for my leather and door panel and it was still spendy, but much less than Katskin... enough I could door my door panels and ordered new subs. I think that Katskin now has such a name that your paying for some of that name in the price. They do offer some neat double stitching options and suedes that you might not has the option to do with other kits.
I would honestly call Princess at Lethal and see what type of stuff she may be able to do for you. You got nothing to lose by calling her.
I looked into a Katskin kit years ago when I redid the interior on the 91, and at the time they had no installed pics... just prices! I ended up using Mr.Mikes.com for my leather and door panel and it was still spendy, but much less than Katskin... enough I could door my door panels and ordered new subs. I think that Katskin now has such a name that your paying for some of that name in the price. They do offer some neat double stitching options and suedes that you might not has the option to do with other kits.
I would honestly call Princess at Lethal and see what type of stuff she may be able to do for you. You got nothing to lose by calling her.
Trending Topics
Senior Member
iTrader: (3)
Joined: Jan 2012
Posts: 790
Likes: 4
From: Downriver, MI
Car: 1986 IROC-Z
Engine: 350
Transmission: T5
Axle/Gears: 4:10
Re: Katzkin leather seat fitting well?
Mr. Mikes did my interior. I had to wait about two months, but it was well worth it.
Joined: Mar 2004
Posts: 313
Likes: 1
From: Winter Haven Fl
Car: 1991 Z28 convertible camaro
Engine: 383 superram
Transmission: Level 4 Vigilante 3000
Axle/Gears: 3:42,Torsen, moser axles LPW girdle
Re: Katzkin leather seat fitting well?
Last year I was looking on Ebay and saw a complete REAL genuine Italian leather seats covers for 999.99$ shipped! And now, I can't find it anymore...The same seller sells the Vinyl one's that seems to match our factory leather appearance for 800$ + 50$ shipping, his Ebay user ID is Rubik. But I would rather pay the extra 200$ for real leather.
Is anyone had experience with this Ebay seller or recall of the leather kit I am talking about??
Is anyone had experience with this Ebay seller or recall of the leather kit I am talking about??
COTM Editor
iTrader: (11)
Joined: Mar 2006
Posts: 4,098
Likes: 13
From: WINDSOR, CO
Car: 91 Z28, 87 SC, 90 IROC, 92 RS
Engine: LS1, 305 TPI, L98, NADA
Transmission: T56, 700r4's, and NADA
Axle/Gears: 3.89, 3.42, 3.23, NADA
Re: Katzkin leather seat fitting well?
Last year I was looking on Ebay and saw a complete REAL genuine Italian leather seats covers for 999.99$ shipped! And now, I can't find it anymore...The same seller sells the Vinyl one's that seems to match our factory leather appearance for 800$ + 50$ shipping, his Ebay user ID is Rubik. But I would rather pay the extra 200$ for real leather.
Is anyone had experience with this Ebay seller or recall of the leather kit I am talking about??
Is anyone had experience with this Ebay seller or recall of the leather kit I am talking about??
Junior Member
Joined: Apr 2009
Posts: 12
Likes: 0
From: WINNEBAGO IL
Car: 1991 Z-28 Camaro
Engine: 350 tpi
Re: Katzkin leather seat fitting well?
installed leather katskins in my 91 z28 , they turned out better than expected... they even have a virtual reality page so u can try different colors and piping before you order. VERY PLEASED WITH THE WAY THEY LOOK. and cost about 1100 bucks..you wont be disappointed..
Senior Member
iTrader: (3)
Joined: Jan 2012
Posts: 790
Likes: 4
From: Downriver, MI
Car: 1986 IROC-Z
Engine: 350
Transmission: T5
Axle/Gears: 4:10
Re: Katzkin leather seat fitting well?
I think we'd like to see a pic Skyjack. I've heard great things from Katzkin but i've never seen them installed in a 3rd gen.
Thread Starter
Joined: Jun 2010
Posts: 648
Likes: 0
From: San Antonio, TX
Car: 1982 Camaro Berlinetta
Engine: GM crate motor Goodwrench 5.7 350
Transmission: 700R4
Axle/Gears: 3.23
Re: Katzkin leather seat fitting well?
When I first heard of them I saw that virtual seat creator and was in love. It was a lot more in depth before and much cheaper. I just made a set to see how it looked and they are around $2000 for just the fronts, and have to be installed by a certified tech.
Supreme Member
iTrader: (2)
Joined: Aug 2007
Posts: 2,529
Likes: 1
From: Fairhope, AL
Car: 89RS(other cars & pics in vBgarage)
Engine: LO3, 305 TBI Mildly Modified
Transmission: BakerBuilt 700R4 w/B&M Megashifter
Axle/Gears: 3.23 Auburn Pro Series LSD
Re: Katzkin leather seat fitting well?
I can have a shop recover seats in real nice leather for cheaper than katzkin. thats meterials, padding repair, installed out the door
Lots of shops are not that bad on recovering seats
Lots of shops are not that bad on recovering seats
Thread
Thread Starter
Forum
Replies
Last Post
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
drathaar907
History / Originality
4
Aug 10, 2015 07:44 AM
1992 Trans Am
Engine/Drivetrain/Suspension Parts for Sale
1
Aug 8, 2015 08:16 PM









