Source for bulkhead connectors? (similar to the c100)

Found a 22 cavity Delphi Weather pack, would like one with more cavities for ECM.

You can ask Brads RS he was able to get one for me,

mouser.com has all the delphi packard connectors good pricing too.

Thanks for the replies. What I dont like about Delpi is their bulkheads have to be unscrewed with a tool. I want something that can plug in and out with no tools. The more I reasearch Im starting to like Deutsch connectors. I cant seem to locate a good U.S. seller. I want to literally have the ability to change out engines in minutes.

Here's what I found on the connectors. Mouser does have some but the others are back ordered and require a minimum purchase.

https://www.thirdgen.org/forums/tpi/...pi-engine.html

http://www.stevesnovasite.com/forums...=114929&page=6

post# 78

This is exactly what I am looking for.

that would be a milspec bulkhead connector

If anyone could give me a part # and or, supplier it would be greatly appreciated.

http://www.lateral-g.net/forums/show...t=18295&page=8

Deutsch AS6-22-55SN

AS 6 22-55 SN

AS622-55SN

AS62255SN

supplier

http://www.ismotorsport.com/products..._contacts.html

good read

https://www.rbracing-rsr.com/wiring_ecu.html

Read it beginning to end this morning with my coffee. Fantastic content! Lots of good usable information and sources. A thousand thanks for linking us to it.

M