Mid-West Region Regional message board for WI, IL, IA, MI, MO, and MN to organize gatherings, meetings, and to help each other out.

Project car plus alot of other parts for sale

Thread Tools
 
Search this Thread
 
Old Jan 12, 2004 | 11:36 AM
  #1  
85_sc's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2002
Posts: 91
Likes: 0
From: Fond du Lac/Madison WI
Project car plus alot of other parts for sale

Hi everybody after alot of consideration I've decided to sell of all my camaro stuff and just finish my Monte Carlo SS below is a list of stuff I am selling I'm located by Fond du Lac, Wisconsin I'm about 40 min from Milwaukee, 1 hour 40 min from Chicago, and just under 5 hours from the Twin Cities. All prices are OBO don't be afraid to offer me a price.

86 Z-28 shell nice body full ground effects plus a 85 SC 2.8 5 speed parts car that runs and is complete except for a few missing pieces. This car has great doors and fenders. $700.00

Hood from 82-92 camaro one ding no rot. $90.00

90-92 camaro dash with gauges with 110 speedo have everything but the upper dash pad and cigarett lighter ****. $150.00

Dash Center Console and door panels out of a 1994 Firebird talked to Dr Vinal dash needs 80 dollars of work to look like new again. It has a 97 Trans am 145mphGauge cluster which sells for around 150 dollars on ebay by itself. All the parts need a good cleaning. $300.00

Ground effects from a 1992 Camaro this is a full set people nose, chin spoiler, side rocker pieces, door pieces, quarter pieces, and rear bumber cover. $475.00

T-top roof section to make a hardtop car into a t-top car with all the right trip pieces and weather stripping channel also the headliner and 2 glass t-tops that are in good condition $150.00.

2 rear hatches one with the 86 rear brake light both have rear defrost. $50.00 each

3 piece rear spoiler with 3rd brake light and lead wires. It's in great conditioon. $50.00

Vortec stage 3 heads these are the most radical vortec heads i have ever seen. They have manley stainless steel valves, aftermarket valvesprings with lightweight retainers, and screw in studs. These were built by the best at mercury marine for there race division as prototypes. $1000.00

I also have two dash pads in good condition. $100.00 each

91-92 Z-28 GM hood blisters no broken studs. $165

4 Gold Iroc-Z wheels one has some curb rash but can be sanded out. $200

Last edited by 85_sc; Jan 12, 2004 at 08:39 PM.
Reply
Old Jan 15, 2004 | 10:21 PM
  #2  
85_sc's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2002
Posts: 91
Likes: 0
From: Fond du Lac/Madison WI
C'mon guys make an offer the worst that can happen is I say no. I'm a reasonable guy and I won't turn down a reasonable offer.
Reply
Old Jan 16, 2004 | 10:40 PM
  #3  
Need4Speed1387's Avatar
Member
 
Joined: Oct 2002
Posts: 334
Likes: 0
From: Gurnee, IL
Car: '86 IROC
Engine: 305 LG4 awaiting the crate Vortec 350
Transmission: 700R4
Got any pics of the '86 and will you separate the two? Any rust?
Reply
Old Jan 16, 2004 | 11:44 PM
  #4  
85_sc's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2002
Posts: 91
Likes: 0
From: Fond du Lac/Madison WI
Yes I would seperat the two I don't have any pictures of the car right now but hopefully I can get out to the garage tomorrow to get some pictures of it before I go back to college for the spring semester. The car is in real good shape for a wisconsin car there was a little rust where the inner wheel housing meets the floor on both sides in the rear of the car. So my dad and I cut that part out and were waiting on metal to make some patch panels. there is a couple of other small spots of rust I'll take pictures of them as well and post them here tomorrow hopefully. All that's included with the 86 is the shell, power optioned doors, 86 style ground effects, and the rear hatch. Also the suspension components and rearend but the rearend didn't have a cover on it when I bought it and still doesn't. I trailered it home so you don't have to worry about any damage to the rear. The rear also has new drum brakes on it. The car also has a clean title. And if you want to buy any of the other parts I could give you a package deal.
Reply
Old Jan 20, 2004 | 04:56 PM
  #5  
Pontiackid's Avatar
Member
iTrader: (3)
 
Joined: Jan 2004
Posts: 252
Likes: 0
From: appleton,WI
Car: trans am ws6
Engine: something special :)
Transmission: T56
Axle/Gears: 4.10 posi
hey 85_sc is the 86 camaro a complete car or is it have no motor, trans etc
Reply
Old Jan 21, 2004 | 06:50 PM
  #6  
85_sc's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2002
Posts: 91
Likes: 0
From: Fond du Lac/Madison WI
Sorry for the delay guys I moved back down to madison a couple of days ago and this week has just been really busy so far. I did get a chance to take some pictures of the cars I'm going to sign up for student webspace and post them there. The 86 is just a shell in real good shape with doors gfx and some misc parts. It doesn't have a motor now but if you guys need one I have shatloads of hookups. I'll put up a website and put pics of everything for sale there.
Reply
Old Jan 21, 2004 | 08:11 PM
  #7  
Pontiackid's Avatar
Member
iTrader: (3)
 
Joined: Jan 2004
Posts: 252
Likes: 0
From: appleton,WI
Car: trans am ws6
Engine: something special :)
Transmission: T56
Axle/Gears: 4.10 posi
85_sc thanks alot for the info man.
Reply
Old Jan 24, 2004 | 05:09 PM
  #8  
85_sc's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2002
Posts: 91
Likes: 0
From: Fond du Lac/Madison WI
Still waiting for my webspace so I can put on some pictures.
Reply
Old Jan 24, 2004 | 07:02 PM
  #9  
ontogenesis's Avatar
Supreme Member
 
Joined: Oct 2002
Posts: 1,641
Likes: 1
From: Las Vegas, NV
Car: 1985 Camaro, 2015 Audi A4
Engine: V8
Transmission: 700R4
by "dash pads in good condition" do you mean no cracks tears or defects?

secondly, what would you take for the blisters?
Reply
Old Jan 24, 2004 | 07:27 PM
  #10  
85_sc's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2002
Posts: 91
Likes: 0
From: Fond du Lac/Madison WI
The one dashpad just has a little nick right in the center of it I was going to try to fill it in with something when i put it on my car. The other one is perfect up top and just has a small crack in the drivers side corner that goes up against the windshield when it's installed you don't know it's there unless you look real close by the windshield corner. I could go 150 on the blisters. Can't go much lower I just had to drop 450 bucks on textbooks.
Reply
Old Feb 14, 2004 | 02:12 PM
  #11  
85_sc's Avatar
Thread Starter
Junior Member
 
Joined: Aug 2002
Posts: 91
Likes: 0
From: Fond du Lac/Madison WI
http://www.geocities.com/scottsterr/86-Z28.htm
here are some pictures of the Z-28 if you check back over the next week i should have more pictures up of the other parts for sale.
-Scott
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
angel2794
Theoretical and Street Racing
25
Mar 7, 2026 01:08 PM
1992 Trans Am
History / Originality
27
May 10, 2023 07:19 PM
colton_carlson
Firebirds for Sale
7
Mar 8, 2019 12:21 PM
fastrs1891
South Central Region
2
Oct 20, 2015 09:24 AM
1nastygta
Firebirds for Sale
2
Aug 8, 2015 07:38 PM




All times are GMT -5. The time now is 06:06 AM.