Ok my fellow Mid Westerners, got some goodies for sale. I dont have pics of it all yet but can get them, but heres the stuff!

Driver and pass. doors, red, mirrors, power window, power locks, have door panels and just no arms, everything still working. $150 OBO

Competition Engineering weld-in subframe connectors, WITH the crossmember to switch over to a 4 link/ladder bar setup. It is missing one of the side pieces that can be easily made, I want to keep the car in a "stock" setup suspension. Jegs part number 247-3017...going for $230
$120 OBO

Another set of weld in sub frame connectors, these required fabrication of the floor boards that I really dont want to do, plus my current car is too rusty underneath to do this too. I think they are the regular Competion Eng., atleast thats what I was told when I bought them.
$50 OBO...PENDING SALE

99% complete Gray interior pieces, missing a cover for the hatch lift arms, and 2 plastic screws, includeds front seat belts. All pieces are in good condition, no cracks, but a few scuffs. $50 OBO

3.23 gear still on open rear GM diff. Came out of my Camaro Z28, isn't original because the RPO is for a 2.73, so it was changed at one point. Gears are clean, no wear on the pinion bearing, no chips, nothing. Missing one of the outer races, but if you switch the gear you will have 2 from that rear that will work $45 OBO

Rear hatch W/O glass with spoiler that has the taillight from an 88 IROC, white/primer. NO RUST needs paint tho $25 OBO

Stock Camaro shifter with cable $15 OBO

Complete Serpentine setup WITH Power steering cooler lines $30 OBO sale pending

Stock oil cooler setup where coolant runs thru it from an 88 IROC $20 OBO

2 700R4 drive shafts, both with yokes, on needs new rear U-joint $15 each OBO

Dash gauge bezel from an 88 IROC, black, no crack/chips near mint $10

Camaro console lid, needs new latch, no cracks $15 OBO

Camaro radio/heating control bezel, no cracks, near mint $10 OBO

Selling my short block 355, roughly 11.5:1, stock crank, GM x-rods, full floating wrist pins, Speed Pro hyper coated pistons, moly top ring, .500" lift cam, Melling high volume oil pump, stock flex plate, stock balancer, no intake/accessories/valve covers/heads, block is blue....LOWERED TO $800 OBO PM me for more details

Feel free to pm me, reply here, or call my cell at 773 844 9749, quickest way is my cell...thanks!!