Hi From NH
Thread Starter
Junior Member
Joined: Oct 2011
Posts: 3
Likes: 0
From: Manchester, NH
Car: 84 z-28
Engine: 2.8l V6
Transmission: 5 speed
Hi From NH
About 2 months ago I bought an 84 z-28, and i've been puttering with restoring all the crap the previous owners did (or didn't) do to it.
Right now my big question is the rear defogger. i've got power to the switch, i've got the hot line back to the left side (although clip has deteriorated), i've got the ground (same issue over there with the clip).
my question is there is a portion of the defogger grid that has a separate clip on it, does this have it's own wire or does it just hook in to the clip at the top of the hatch?
oh, and from what I am able to gather, the hatch is not stock for my car, as i do not have a berlinetta yet i have the overhead tail light.
any feedback would be appreciated, thanks
Right now my big question is the rear defogger. i've got power to the switch, i've got the hot line back to the left side (although clip has deteriorated), i've got the ground (same issue over there with the clip).
my question is there is a portion of the defogger grid that has a separate clip on it, does this have it's own wire or does it just hook in to the clip at the top of the hatch?
oh, and from what I am able to gather, the hatch is not stock for my car, as i do not have a berlinetta yet i have the overhead tail light.
any feedback would be appreciated, thanks
Member
Joined: Nov 2009
Posts: 177
Likes: 1
From: Pittsfield, NH
Car: 1988 Base Coupe
Engine: 350
Transmission: T5
Axle/Gears: 9 bolt w/ disk brakes - 3.70
Re: Hi From NH
An 84 would not have a 3rd brake light period, so your hatch is probably from another car. as far as the clip you are talking about, pictures would help.
Thread Starter
Junior Member
Joined: Oct 2011
Posts: 3
Likes: 0
From: Manchester, NH
Car: 84 z-28
Engine: 2.8l V6
Transmission: 5 speed
Re: Hi From NH
I'll Post a picture in the morning, and I figured that the hatch was from a newer model, there are a number of parts on this car that don't match up to options available at the time...
Member
Joined: Nov 2009
Posts: 177
Likes: 1
From: Pittsfield, NH
Car: 1988 Base Coupe
Engine: 350
Transmission: T5
Axle/Gears: 9 bolt w/ disk brakes - 3.70
Re: Hi From NH
Come spring I will be at the car show at arnies in concord almost every week if you need any help with the car. I've had my 90 z28 for several years now and I'm currently restoring an 88. I can also refer you to some good places within driving distance to get parts if you need them.
Thread Starter
Junior Member
Joined: Oct 2011
Posts: 3
Likes: 0
From: Manchester, NH
Car: 84 z-28
Engine: 2.8l V6
Transmission: 5 speed
Re: Hi From NH
sorry this post took so long, the last few days kind of sucked for free time.
The pictures aren't the best... i'm thinking i'm just going to try linking it to the existing good wiring and see what happens...
The pictures aren't the best... i'm thinking i'm just going to try linking it to the existing good wiring and see what happens...
Joined: Aug 2011
Posts: 413
Likes: 1
From: Plaistow,NH
Car: 92 Camaro Z
Engine: LS 5.3 LM7
Transmission: Built TH350 with 3200 stall
Axle/Gears: 4th gen, 4.10
Re: Hi From NH
Come spring I will be at the car show at arnies in concord almost every week if you need any help with the car. I've had my 90 z28 for several years now and I'm currently restoring an 88. I can also refer you to some good places within driving distance to get parts if you need them.
Thanks
Member
Joined: Nov 2009
Posts: 177
Likes: 1
From: Pittsfield, NH
Car: 1988 Base Coupe
Engine: 350
Transmission: T5
Axle/Gears: 9 bolt w/ disk brakes - 3.70
Re: Hi From NH
there is a guy i know just over the boarder into Mass, he has been stripping 3rd gens for awhile and has almost anything you need very reasonably priced.
Trending Topics
Member
Joined: Jul 2011
Posts: 232
Likes: 0
From: massachusets
Car: 87 z28 stock
Engine: 305 tpi
Transmission: 700r4
Joined: Mar 2008
Posts: 2,943
Likes: 20
From: Boston, MA
Car: 1983 Pontiac Trans Am Daytona 500
Engine: Crossfire 305ci V8
Transmission: Jasper 700R4 4 speed Automatic
Axle/Gears: 3.23 limited slip/posi
Member
Joined: Jul 2011
Posts: 232
Likes: 0
From: massachusets
Car: 87 z28 stock
Engine: 305 tpi
Transmission: 700r4
Re: Hi From NH
Joined: Aug 2011
Posts: 413
Likes: 1
From: Plaistow,NH
Car: 92 Camaro Z
Engine: LS 5.3 LM7
Transmission: Built TH350 with 3200 stall
Axle/Gears: 4th gen, 4.10
Member
Joined: Jul 2011
Posts: 232
Likes: 0
From: massachusets
Car: 87 z28 stock
Engine: 305 tpi
Transmission: 700r4
Member
Joined: Jul 2011
Posts: 232
Likes: 0
From: massachusets
Car: 87 z28 stock
Engine: 305 tpi
Transmission: 700r4
Re: Hi From NH
I have been to camaro heaven. they have a huge selection and are likley to have many of anything you need.
Member
Joined: Jan 2011
Posts: 297
Likes: 0
From: Wilmington, Massachusetts
Car: 1983 Z28/2000 ZR2
Engine: CFI to carbed 305/ 4.3
Transmission: Built 700r4/4L60e
Axle/Gears: 3:23/3:73
Re: Hi From NH
To dig up an old thread, is it a call Don ahead of time type of thing or strictly show up and get what you need?
Joined: Aug 2011
Posts: 413
Likes: 1
From: Plaistow,NH
Car: 92 Camaro Z
Engine: LS 5.3 LM7
Transmission: Built TH350 with 3200 stall
Axle/Gears: 4th gen, 4.10
Re: Hi From NH
Buy with confidence.
I believe he has the cars in his yard so he may not want someone walking around there without him present. He always responds to a call or text so best thing is to ask him directly.
Re: Hi From NH
Don is a great guy,I've bought many parts from him to get my bird on the road,Camaro Heaven on the other hand,called several times,never got a return call to say yes or no on parts.






