Alternative Port EFI Intakes This board is for tech discussions and questions about aftermarket port EFI such as the HSR, MR, SR, BBK, FIRST, etc.

FAST EZ EFI Kit Upgrade

Thread Tools
 
Search this Thread
 
Old Jul 17, 2013 | 02:30 PM
  #1  
Brettpaterson's Avatar
Thread Starter
Junior Member
 
Joined: May 2013
Posts: 28
Likes: 0
From: Canada
Car: '86 iroc z
Engine: 350 sbc vortec from ATK
Transmission: T-5
FAST EZ EFI Kit Upgrade

looking at the atk high performance website at turnkey engines. seen that the fast ez efi upgrade was an option at a cost of $1900. im looking at doing a swap from my 305 carbed engine to a 350. do I need to get an efi kit or is it just an upgrade? thanks
Reply
Old Jul 17, 2013 | 03:07 PM
  #2  
midias's Avatar
Supreme Member
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Oct 2004
Posts: 4,528
Likes: 240
From: Henrietta NY
Car: 1984 Trans Am L69
Engine: Sniper EFI Powered 355
Transmission: WC T5 w/ Steel Support Plate
Axle/Gears: 3.42 10 Bolt Posi
Re: FAST EZ EFI Kit Upgrade

You can run a carb on your 350. EFI is nice but not required.
Reply
Old Jul 17, 2013 | 03:31 PM
  #3  
UnderCover89TBI's Avatar
Supreme Member
iTrader: (25)
 
Joined: Feb 2006
Posts: 7,260
Likes: 5
From: Manteca,California. Nor Cal.
Car: SOLD IT. Mopar guy only now.
Engine: gone
Transmission: gone
Axle/Gears: gone
Re: FAST EZ EFI Kit Upgrade

you can get the fast ez efi with throttle body for about 1600.00 on ebay. but you might just go carb, the MPG isn't gonna be much different.
Reply
Old Jul 18, 2013 | 05:53 AM
  #4  
anesthes's Avatar
TGO Supporter/Moderator
25 Year Member
iTrader: (13)
 
Joined: Jul 1999
Posts: 12,100
Likes: 127
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: FAST EZ EFI Kit Upgrade

Originally Posted by Brettpaterson
looking at the atk high performance website at turnkey engines. seen that the fast ez efi upgrade was an option at a cost of $1900. im looking at doing a swap from my 305 carbed engine to a 350. do I need to get an efi kit or is it just an upgrade? thanks
No it's not required, but neither is electricity and running water.

-- Joe
Reply
Old Aug 5, 2013 | 10:44 AM
  #5  
Ronny's Avatar
TGO Supporter
20 Year Member
iTrader: (1)
 
Joined: Mar 2003
Posts: 6,880
Likes: 4
From: wisconsin
Re: FAST EZ EFI Kit Upgrade

FYI EZ 2.0 now supports spark...
Reply
Old Aug 12, 2013 | 10:01 PM
  #6  
slrvette's Avatar
Member
iTrader: (1)
 
Joined: Sep 2006
Posts: 260
Likes: 0
Car: Corvette
Engine: 388 HSR custom Cam see sig
Transmission: 700R4
Axle/Gears: D44 3:45
Re: FAST EZ EFI Kit Upgrade

Originally Posted by Ronny
FYI EZ 2.0 now supports spark...
It does..however after speaking with tech support the system doesn't support HEI ignition. You would have to buy either there distributor or MSD.
Doesn't support Lock out if you have an automatic and the harness adapters are set up for LT1 or LSx motors.
Reply
Old Aug 13, 2013 | 04:12 PM
  #7  
efiguy's Avatar
Member
iTrader: (2)
 
Joined: Apr 2010
Posts: 394
Likes: 2
From: Central Florida
Re: FAST EZ EFI Kit Upgrade

Originally Posted by slrvette
It does..however after speaking with tech support the system doesn't support HEI ignition. You would have to buy either there distributor or MSD.
Doesn't support Lock out if you have an automatic and the harness adapters are set up for LT1 or LSx motors.
There are lots of shortcomings on some of these TBI systems. Be careful of the claimed "ease of installation".
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Fast355
DFI and ECM
14
Dec 2, 2016 06:33 PM
1986Z28OWNER
Power Adders
46
Dec 13, 2015 10:19 PM
New2Chevy
Engine/Drivetrain/Suspension Parts for Sale
2
Sep 28, 2015 12:35 AM
angel2794
Engine Swap
11
Sep 8, 2015 06:22 PM
1Aauto
Sponsored Vendors
0
Sep 2, 2015 01:35 PM




All times are GMT -5. The time now is 10:52 PM.