I got some supercharging q's
Thread Starter
Member
Joined: Apr 2003
Posts: 191
Likes: 0
From: Wisconsin
Car: IROC-Z
Engine: L98 350/ 5.7L
Transmission: 700R4
I got some supercharging q's
ok first...
how much is that setup with the twin inter coolers coolers that's posted on a sticky?
and second
what does the ratios mean on the FMU...12.1 and 10.1... what is this reffering to and which would i need to get.
my engine is stock L98 lots of other goodys to upgrade later being planned too
how much is that setup with the twin inter coolers coolers that's posted on a sticky?
and second
what does the ratios mean on the FMU...12.1 and 10.1... what is this reffering to and which would i need to get.
my engine is stock L98 lots of other goodys to upgrade later being planned too
Joined: Jul 1999
Posts: 2,926
Likes: 5
From: Tucson, Arizona USA
Car: 1987 Z28 Convertible
Engine: 305 TPI
Transmission: 5-speed
Re: I got some supercharging q's
....how much is that setup with the twin inter coolers coolers that's posted on a sticky?
I developed the kit with ATI. The only source for the twin setup is Dave Back.
E-mail: dback@tenperf.com
Website: http://www.tenperf.com
what does the ratios mean on the FMU...12.1 and 10.1...
10:1 >> For every pound of boost, fuel pressure is increased 10-psig.
....which would i need to get.
I have no clue. I've never used one.
I developed the kit with ATI. The only source for the twin setup is Dave Back.
E-mail: dback@tenperf.com
Website: http://www.tenperf.com
what does the ratios mean on the FMU...12.1 and 10.1...
10:1 >> For every pound of boost, fuel pressure is increased 10-psig.
....which would i need to get.
I have no clue. I've never used one.