Fuel system for larger HP cars w/in
#1
Supreme Member
Thread Starter
Join Date: Jul 1999
Location: Indianapolis, IN
Posts: 1,827
Likes: 0
Received 1 Like
on
1 Post
Car: 2000 Trans Am
Engine: LS1
Transmission: T56
Fuel system for larger HP cars w/in
Got half of mine installed last night.
I have an aeromotive regulator to put up front. I just need to get my braided hose clamped down so I can figure out where exaclty its going to mount. Ill post pics of that when I get it all tired down too.
------------------
-86 IROC
Vortech stuffed EFI 406 in progress
-=ICON Motorsports=-
I have an aeromotive regulator to put up front. I just need to get my braided hose clamped down so I can figure out where exaclty its going to mount. Ill post pics of that when I get it all tired down too.
------------------
-86 IROC
Vortech stuffed EFI 406 in progress
-=ICON Motorsports=-
#2
Member
Join Date: Feb 2000
Location: state college pa
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
Are you still going with the super? I saw gary hess formula that is the cleanest fastest formula i have ever seen. I also saw THE corvette from speedway. it was the first time at the track so they were tuning it. At 20 lbs he ran 8.9@161 this car maid 1650hp @35 lbs. This is single turbo 410 sb that is simply amazing and still runs the IRS.this car a cd player and subwoofer in the back and looks like any plain vette.
#3
Member
Join Date: Jul 1999
Location: Little Rock, AR
Posts: 101
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Z28
Guido, quick tip dude, rubber mount that fuel pump to help keep the interior noise down. MSD makes some nice rubber mounts that have studs made into them that should work well.
#4
Member
Join Date: Nov 1999
Location: FALL RIVER MA USA
Posts: 391
Likes: 0
Received 0 Likes
on
0 Posts
Or you can do the cheap hacker way I did to Isolate my ATI pump when i put it in.Get an old tire,cut a fat piece of rubber off the sidewall,Wala,cheap rubber mount
#5
Supreme Member
Join Date: Apr 2000
Location: chi-town
Posts: 1,711
Likes: 0
Received 0 Likes
on
0 Posts
Actually Superiroc, he was only running 15psi when he ran that number. Hey, were you there? I was, looked for you but couldn't find you. Bill is an extremely nice guy and he even stayed at my hotel and i got to talk to him a lot. BTW, i think corrected Bill's number would be like 8.65 @ 164-165. Also, yes the motor dynoed that much with that much boost, but he told me that it was kind of out of the compressor range and would probably never run that much at the track ever. Considering he could run like 25psi and still run 7's. amazing
#6
Member
Join Date: Apr 2000
Location: The Great White North
Posts: 243
Likes: 0
Received 0 Likes
on
0 Posts
Is that the vette from GMhightech. Fast car. Reminds me of the one in my home town in Northern Canada.
Buick Regal, twin turbo'ed 350, custom built fuel injection, mufflers, street car, insured, 8.92@150something on DOT tires. He's the fastest in British Columbia.
It's awsome at the drags if your sitting in the stands listening to people they seee it line up beside like a ten second big block camaro and are like "that old white gramma car is gonna get killed" its so funny because its so quiet and then bang you hear the turbos and he's gone.
Hey that Bill guy is Canadian too, I guess we really kick *** .
Buick Regal, twin turbo'ed 350, custom built fuel injection, mufflers, street car, insured, 8.92@150something on DOT tires. He's the fastest in British Columbia.
It's awsome at the drags if your sitting in the stands listening to people they seee it line up beside like a ten second big block camaro and are like "that old white gramma car is gonna get killed" its so funny because its so quiet and then bang you hear the turbos and he's gone.
Hey that Bill guy is Canadian too, I guess we really kick *** .
#7
Supreme Member
Join Date: Apr 2000
Location: chi-town
Posts: 1,711
Likes: 0
Received 0 Likes
on
0 Posts
Damn right, they do. Bill is doing my motor and his car is capable of 7's if he gets rid of that IRS and puts a drag suspension on the car. We can only wait and see if he passes emissions.
Trending Topics
#8
hey, what size lines are you using on the fuel rails of that miniram, -8 or -10? i've got a -8 line running from my pump to the rails, but have to neck it down to -6 to screw into the rails of my miniram. i'm wondering if i'm going to run into fuel problems but won't know until i get it up and running... just have to get a heater hose fitting, finish my variable injector controller wiring, set the timing and fire it up.
------------------
Jeff
99 T/A WS6 A4, RKSport lid & free EGR mod
88 GTA twin turbo 358, forged crank, forged H-beam rods, Wiseco reverse dome pistons, Dart Sportsman II 72cc heads, Comp Cams custom grind blower cam (.560/.586 lift, 232/236 duration), 1.6 roller rockers, TPIS mini ram intake manifold w/ Accel 58mm TB, 83 lb injectors, Accel DFI computer with variable injector controller, 2 Garrett T04B "hair dryers" with dual Garrett wastegates, TH400 tranny with BTE transbrake and Art Carr custom converter, F*rd 9 inch rear w/ 3.50 gears, and more...
------------------
Jeff
99 T/A WS6 A4, RKSport lid & free EGR mod
88 GTA twin turbo 358, forged crank, forged H-beam rods, Wiseco reverse dome pistons, Dart Sportsman II 72cc heads, Comp Cams custom grind blower cam (.560/.586 lift, 232/236 duration), 1.6 roller rockers, TPIS mini ram intake manifold w/ Accel 58mm TB, 83 lb injectors, Accel DFI computer with variable injector controller, 2 Garrett T04B "hair dryers" with dual Garrett wastegates, TH400 tranny with BTE transbrake and Art Carr custom converter, F*rd 9 inch rear w/ 3.50 gears, and more...
#9
Member
Join Date: Feb 2000
Location: state college pa
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
89iroc were you wearing an f-body.com t shirt? I was there but without car. I was the short stalky dude walking around with the camcorder and camera. Bill seems realy cool and he knows his stuff wow. He is also doing my car a twin t04 355 that he said can make 1000hp. I might be skeptical but after seeing that amazing vette i have no doubt. What is bill going o do with your car?
#10
Supreme Member
Thread Starter
Join Date: Jul 1999
Location: Indianapolis, IN
Posts: 1,827
Likes: 0
Received 1 Like
on
1 Post
Car: 2000 Trans Am
Engine: LS1
Transmission: T56
Originally posted by Twin Turbo 358:
hey, what size lines are you using on the fuel rails of that miniram, -8 or -10?
hey, what size lines are you using on the fuel rails of that miniram, -8 or -10?
#11
Supreme Member
Join Date: Apr 2000
Location: chi-town
Posts: 1,711
Likes: 0
Received 0 Likes
on
0 Posts
Originally posted by superiroc:
89iroc were you wearing an f-body.com t shirt? I was there but without car. I was the short stalky dude walking around with the camcorder and camera. Bill seems realy cool and he knows his stuff wow. He is also doing my car a twin t04 355 that he said can make 1000hp. I might be skeptical but after seeing that amazing vette i have no doubt. What is bill going o do with your car?
89iroc were you wearing an f-body.com t shirt? I was there but without car. I was the short stalky dude walking around with the camcorder and camera. Bill seems realy cool and he knows his stuff wow. He is also doing my car a twin t04 355 that he said can make 1000hp. I might be skeptical but after seeing that amazing vette i have no doubt. What is bill going o do with your car?
[This message has been edited by 89ProchargedROC (edited October 31, 2000).]
#12
Member
Join Date: Feb 2000
Location: state college pa
Posts: 286
Likes: 0
Received 0 Likes
on
0 Posts
thats right you were with your girlfriend. I got the shirt wrong oops. I heard you make a smart remark about how john put 4k into than formula. I couldn't agree more put a Sr or Mr on that car and some good heads. I think they could of built a much better 350 for the same price IMHO.
Thread
Thread Starter
Forum
Replies
Last Post
9192camaro
Engine/Drivetrain/Suspension Parts for Sale
16
02-03-2019 12:21 AM
beachrodder
Tech / General Engine
7
08-25-2015 08:05 AM