Hey guys, I know there are a TON of engine swaps on this page but I thought I'd start my own so I can keep organized. I build track cars mainly for NASA circuits and Time Attacks and I have a customer who wants me to stray from that and take his 1992 305 tpi and swap in the 350 engine from Year One (part number CT350PC1) and Tranny (AT222) into it. These are both on year one's site, so check them out. He also wants them boosted, which is no problem seeing as I build turbos all the time, but I am alittle unsure as to how and tune something like this to run safely on boost. I try and do what my customers want but I certainly dont know everything and there is alot of knowledge on this forum so I thought I would give it a shot and see. What could be used from the original car/305 engine and what about tuning and such? He wants to add runners and such to keep it injected so I wont have to do it with a carb, but before I sign off on the project, I'd like to know alittle more about it all. I'm not one of those shop owners who will say they know it all because I certainly dont, but with some help from you guys I may be able to figure out the best possible way to get it done. I was halfway thinking of just rebuilding the 305 but I'm not sure..... Thanks guys!