WALBRO PUMP HANGERS
07-24-2017, 11:50 AM
#2
Re: WALBRO PUMP HANGERS
Most people only need dual 255. Good to 1000 whp on most v8's on gas. 750-800 maybe on e85
It be very difficult to do triples on a stock 3rd gen tank. Opening up top is smaller than 4th gen
A single walbro 400/450 e85 rated pump is awesome for a single on gas up to near 900 whp on gas i would say. Depends on pressure.
It be very difficult to do triples on a stock 3rd gen tank. Opening up top is smaller than 4th gen
A single walbro 400/450 e85 rated pump is awesome for a single on gas up to near 900 whp on gas i would say. Depends on pressure.
07-24-2017, 03:25 PM
#4
Senior Member
iTrader: (2)
Join Date: Aug 2014
Location: Fort Collins, CO
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Firebird Formula
Engine: 5.7L TPI
Transmission: 700r4
Axle/Gears: 3.23
Re: WALBRO PUMP HANGERS
Are you going to be offering a single pump offering as well? I recall that I had to get my Walbro machined down on the end to accept the GM size fuel sock, so if you can either pre-machine it or include the proper sized sock that'd be swell.
07-24-2017, 04:50 PM
#6
Senior Member
iTrader: (2)
Join Date: Aug 2014
Location: Fort Collins, CO
Posts: 575
Likes: 0
Received 0 Likes
on
0 Posts
Car: 1991 Firebird Formula
Engine: 5.7L TPI
Transmission: 700r4
Axle/Gears: 3.23
Re: WALBRO PUMP HANGERS
Don't think I'll need the hanger, as long as there's no problems using my standard GM sending unit. It's one of the "nice" $400 A/C Delco ones (i.e. not a spectra one which I've heard are pretty hit and miss). The Walbro I have in there right now seems to fit fine.