Re: Double Din Radio Bezel
 

Did you use the landau black over the texture? Just ordered my bezel need to order paint. Warmer weather is coming so gathering my stuff up to do this.

Re: Double Din Radio Bezel
 

After the SEM texture paint I just sprayed it with a standard black car interior paint but don’t remember brand. I can look later and post then.

Re: Double Din Radio Bezel
 

Did the same thing when I got my Alpine last year, took the guy who was printing a few tries to get it to print properly but it turned out great! Only cost me about 30$ w/ Shipping (within Canada)

Was gonna fill in the print grooves with puddy and paint it but I actually like the look of it.

https://cimg3.ibsrv.net/gimg/www.thi...993703b1d7.jpg

Re: Double Din Radio Bezel
 

Hey guys who did you use for your 3d printing the guy 3dhub link me to told me the print will be weak with scarring and will break easily

Re: Double Din Radio Bezel
 

The guy or 'hub' that printed mine is located in Quebec because it he was the closest guy who had a printer big enough to print the radio bezel (The Lulzbot Taz 4) Here's his hub link.

The first print he made didn't turn out very well, but the second one was perfect. There was a postage issue when he mailed me the part and so I asked him to make a third one, then the lost parcel arrived at my door so he told me he'd keep the third one in case mine broke. Mine is perfectly fine so if you contact him about the Camaro Radio Bezel he may still have it in storage. If you're located in Canada he's the one I'd order from, shipping was very cheap, even across 3 provinces.

Re: Double Din Radio Bezel
 

thanks for the info was yours the reversed style with the hvac at the bottom? That's what I'm looking for

Re: Double Din Radio Bezel
 

I actually didn’t end up going through a printing service and I purchased a printer just to help me make some more parts for my camaro. The reversed file worked perfect for me and so far I printed three(one for my car, my fathers iroc, and a friend) and all were definitely not brittle. Maybe you should get a quote from another source if they were giving a hard time.

Re: Double Din Radio Bezel
 

I had Matt at 3dhubs print mine. Used abs and seems as solid as the stock one. I didn't get the HVAC on bottom but think I'll try and invert the standard double din since my pyle is too long to fit on lower. The duct work keeps it from going deep enough. Have not got past a few mock ups but will get it figured out without rigging it.

Re: Double Din Radio Bezel
 

I wanted to keep everything stock so I didn't bother moving the HVAC. But there is a 3d file of the radio bezel with them reversed and it should print basically the same.

Re: Double Din Radio Bezel
 

so is anyone on here making these?

Re: Double Din Radio Bezel
 

I too would be interested in purchasing one for an 87 Iroc , preferably the reversed bezel , but if the price is good then one of each .

Re: Double Din Radio Bezel
 

Send the file you want to 3dhubs... Matthew will make you one

Re: Double Din Radio Bezel
 

I think I got it figured out now , thanks

Re: Double Din Radio Bezel
 

Trying to figure out all these posts and 3D print options does anyone Just sell a double din radio bezel that fits a 1985 trans am?

Re: Double Din Radio Bezel
 

So far if you go to thingiverse.com and choose the correct file for either camaro or Firebird you can order the file printed. That would be the only option unless you have a 3d printer currently.

Re: Double Din Radio Bezel
 

I don't know how much goes into printing something like this but I guess I'm surprised nobody on here is selling these. I would rather buy from someone on our community than someone I've never had any contact with.

Re: Double Din Radio Bezel
 

I may be running some camaro ones off as well as the cup holders designed for the camaro ashtray soon I just need some time and I may eventually be willing to sell some for people just trying to figure out the cost of product.

Re: Double Din Radio Bezel
 

Hello Everyone,
Within the next week I’m going to run a few different double din bezels off such as reverse, camaro, Firebird. After I see how they turn out I’m going to see pricing for the material and I’ll post some pics up and for anyone interested in buying one just message me and let me know. More progress will be up soon.

Re: Double Din Radio Bezel
 

Has anyone that did the reverse bezel actually got their radio to fit? Besides the parrot smart radio. I am having trouble getting it to fit because of the upper brace not allowing it to sit at the correct angle. If anyone has got it to work please let me know what you did. Thx

Re: Double Din Radio Bezel
 

Has anyone had https://www.thingiverse.com/thing:2249678 - checked - printed out? Do you have a pic of the finished product?

Re: Double Din Radio Bezel
 

seeing as how all of the clips are broken off of my stock bezel I would be interested in trying out a new one

Re: Double Din Radio Bezel
 

I don’t have a Firebird but I’m planning on trying out this print in the next couple days so I can post an update when it’s done.

Re: Double Din Radio Bezel
 

So I worked on my car today since we got a streak of nice weather I brought the car home for some work!! The metal support for the dash was also a problem for me that I didn’t realize was there until you mentioned. I cut the support out of my car and trimmed the opening and I shook my whole dash and everything and nothing major moved so I reattached my console to the sides of the dash. After some trimming everything fit great but I forgot the darn pictures so I will update tomorrow with some pics.

Re: Double Din Radio Bezel
 

Not sure I am willing to cut that out or not. I will have to do some research and what the whole thing looks like. Let me know if anything shifts or rattles when you drive it next.

Re: Double Din Radio Bezel
 

Ok so I did end up driving it back over to my storage garage and nothing rattled. The way I cut the support out though I left the two sections on either end that mount the console to the dash so everything is secure. The only thing is I still have to take things back apart as I have a new antenna coming in the mail and a USB port I’m gonna install. I’m very happy with everything so far only a little bit more to do once the new parts come and most of my interior job will be complete!!

Re: Double Din Radio Bezel
 

I will have to look at mine once I get more time to see if I want to risk it. Would beat making a new bezel. Can't wait to see some pics.

Re: Double Din Radio Bezel
 

Not the best pictures but I’m really happy with it!!

https://cimg8.ibsrv.net/gimg/www.thi...2c8e330ca.jpeg

https://cimg9.ibsrv.net/gimg/www.thi...38c88057f.jpeg

Re: Double Din Radio Bezel
 

Looks good. I love the cup holders.

Re: Double Din Radio Bezel
 

Need a usb port, for the radio, in the middle at the top of the cup holders that would be cool.

Re: Double Din Radio Bezel
 

I actually have a design for it there will be a USB port right in the front area of where the parking brake is. I have to install that eventually but I haven’t gotten a couple parts to need in the mail yet.

Re: Double Din Radio Bezel
 

If you have the radio out again I would love to see a picture of the support that was cut.

Re: Double Din Radio Bezel
 

Cool! Looking forward to seeing it!

Re: Double Din Radio Bezel
 

I had mine printed a little while back, but finally got a day off to install it. I wanted to prime it before painting to make the surface uniform, but everything looks great. I moved the hvac controls up about 1/4". Now that I know it fits Ill do a sand, one more prime, then texture paint and final paint.

The alpine ilx 107 is nice, but probably not worth the money compared to other Car Play receivers.

Thank you 7thdarkangel for making this!

Re: Double Din Radio Bezel
 

Anyone try printing out the Firebird version yet?

Re: Double Din Radio Bezel
 

fits well

http://i1375.photobucket.com/albums/...pskib8udr3.jpg

Re: Double Din Radio Bezel
 

Thank you, that looks great. Now I need to find someone to print me out one.

Re: Double Din Radio Bezel
 

Sorry I never got back to you I’ve been away for a little bit but I was still trying to manipulate that file as I can’t get it to position right to print with my machine. May decide to mess with it again eventually just working on camaro stuff first. I’ll let you know if I change my mind and actually can figure out the issue I was having!

Re: Double Din Radio Bezel
 

:thumbsup:

Re: Double Din Radio Bezel
 

@G92, Are you making these to sell here on the forum? I am also very interested and would rather support someone on here then a random person with a printer.

Side note, did you make the cup holders or is that something that can be ordered? I'm new to the third gen.

Re: Double Din Radio Bezel
 

Hallo DynoDave43 deine radio blende ist echt gut gelungen 👌 hättest du zufällig die richtigen druck Dateien für mich? Ich habe einen der mir das mit einem 3d Drucker drucken kann.

Ich baue mir gerade meinen pontiac firebird zum KITT um und möchte unbedingt so eine blende haben, da ich mir ein 2din Radio von xtrons gekauft hatte.*
Liebe Grüße Simon*
*

Re: Double Din Radio Bezel
 

From Google translate...


"Hello DynoDave43 your radio aperture is really good �� would you have the right print files for me? I have one that can print that to me with a 3d printer.

I am currently converting my pontiac firebird to the KITT and I really want to have such a blind, as I had bought a 2din radio from xtrons. *
Greetings Simon *"


Welcome aboard Simon!


That is not my part. It belongs to member Cehbra. Hopefully he will chime in with your answer.

Re: Double Din Radio Bezel
 

Hi Simon, welcome aboard.

Always do a search first! :search:

brettr81 put all the relevant information in this thread here. https://www.thirdgen.org/forums/car-...ml#post6106206

The thread that discusses the checkered pattern (Schachbrettmuster) is here: https://www.thirdgen.org/forums/car-...vement-3d.html

There you will find all the necessary files.

Re: Double Din Radio Bezel
 

Awesome work! I had the 2DIN panel printed:

https://cimg9.ibsrv.net/gimg/www.thi...51046f4868.jpg

Needs some sanding and spray paint to finish it. Very happy with this; i did not want to molest the original frame and i will keep the original wiring intact so i can go back to full stock in the future.

Re: Double Din Radio Bezel
 

Some pictures of the install. I purchased a 2DIN android head unit and put it in the car. I want to be able to get all back to stock, so I ordered the correct wiring harnass for my car:

https://cimg6.ibsrv.net/gimg/www.thi...d6396057ae.jpg

https://cimg7.ibsrv.net/gimg/www.thi...36109f7e04.jpg

Soldered that to the ISO connector that came with the radio. Good thing all the wire colour coding matched.
Made the job a lot easier.

https://cimg8.ibsrv.net/gimg/www.thi...1489c45032.jpg

Next up remove the stock radio. First the face plate then the four screws holding the radio.

https://cimg9.ibsrv.net/gimg/www.thi...4972f8efd7.jpg

Back of the radio with the wire harness of the car (constant positive already plugged out):

https://cimg0.ibsrv.net/gimg/www.thi...d1cf18e25f.jpg

After test fitting the new 2DIN unit it would not fit. I needed to move the heater controls up in the console.
Drilled some new holes on the bracket for the controls:

https://cimg1.ibsrv.net/gimg/www.thi...b00bb3b328.jpg

Getting this back in was horror, because the two upper bolts are behind the console plastic. Solution could be to remove the complete upper console but i decided against that.
So after ten minutes of fiddling i finally had the bolts back in. The controls work fine in the new position (cleaned and oiled the cabled mechanism right away).
Then the new head unit proved to be a bit big :-). In the bottom of the console is a metal bracket between the sides of the console holding the original radio.
I turned that one around 180 degrees to get some more clearance. That worked a bit, but the unit now touches the plastic inside the console so it will not fit any deeper than this:

https://cimg2.ibsrv.net/gimg/www.thi...259c2a9bf.jpeg

Getting the brackets mounted in for the radio with correct alignment was also a pain, but eventually it worked. Radio works great; good sound and amp punch and i like the Android device using spotify and navigation apps!

https://cimg3.ibsrv.net/gimg/www.thi...3cef12237.jpeg

Because of the size of the headunit the printed new bezel will not fit the radio at all. I need to cut the bottom out and make the sides bigger to fit around the radio.
The heater controls line up pretty good. They are a bit high for the position I got them in but I will fix that trimming that hole of the bezel as well.

I did not realize the sheer size of this monster head unit. Doing it again i would probably buy a head unit with less depth. That will fit the console better.
But hey, happy how it turned out now. And i can always go back stock as if nothing happened.

Re: Double Din Radio Bezel
 

Re: Double Din Radio Bezel
 

Re: Double Din Radio Bezel
 

Was the file ever updated on thingiverse?

The stock bezel is on the left. On the files on thingiverse, the reversed double din bezel has it on the left, but the standard bezel and double din bezel have it on the right.

*edit*
I just got mine and noticed the tab on the incorrect side, so thought I'd ask. Also, on the one I got, the 'face' of the HVAC also appears to be delaminated for lack of a better word, which I think is fault of the printer. Before I contact the guy that printed it, can anyone confirm that this is not correct? It's odd in that the where the HVAC is is rough, but the other thin part doesn't fit in it very well, like it's a touch bigger so it bows up. Anyone with a knowledge of how these are printed have any insight?

http://www.fototime.com/25BD3BE28E8C95A/standard.jpg

http://www.fototime.com/A4D6352AE6614C1/standard.jpg

Re: Double Din Radio Bezel
 

The face coming off is definitely a printing issue. Looking back at the files, it looks like I dropped the ball on updating the standard double din files. As right now they should be correct. Just got done updating them.

Thanks for the heads up.

Re: Double Din Radio Bezel
 

I really can't say it enough, thank you for doing the tough part.

A few years ago I bought the one from DD Mods. It was ok, and at the time really the only thing out there. Even with the issues, the one I had printed is stout! I won't feel like it's going to break on me. I've contacted the printer and we're working it out.

Thanks again!

*edit* The little tab hooks into the center console where there isn't room to fit a screw, hence the half length fake screw that goes there. That tab is what broke on my DD Mods one after R&R'ing it a few times. That bezel held in place ok without it, but did have a tiny gap at the top.

Re: Double Din Radio Bezel
 

Just curious, what printer did you end up going with?
Would you recommend it?