1989 GTA partout Car is now gone(2-9-20) Still have parts that were removed and not sold Tail lights are sold Transmission is sold Dash pad is sold front bumper sold Front fenders sold Wheels are sold rear seats sold Headlight harness and modules sold rearend sold Center console sold doors are sold Ttop divider is sold fuel lines are sold sending unit and pump sold Tank is gone have a good set of glass ttops grey leather interior. Front seats are in need of covers. Lumbar with manual sliders radio pod cluster cluster surround door panels door arm pulls headlight switch assembly performance suspension lower dash plaque. N10 dual cat exhaust. With flowmaster muffler attached. shift knob auto. harness ecm headlights ground effects available. more pics will be added at the bottom. https://cimg4.ibsrv.net/gimg/www.thi...5c7518579b.jpg https://cimg7.ibsrv.net/gimg/www.thi...0fef60bbb4.jpg https://cimg8.ibsrv.net/gimg/www.thi...3117e9587e.jpg https://cimg0.ibsrv.net/gimg/www.thi...afe77c68a9.jpg https://cimg1.ibsrv.net/gimg/www.thi...9788e08ffb.jpg https://cimg5.ibsrv.net/gimg/www.thi...cc7d088a80.jpg https://cimg7.ibsrv.net/gimg/www.thi...b9c3d78701.jpg https://cimg4.ibsrv.net/gimg/www.thi...8099863f46.jpg https://cimg5.ibsrv.net/gimg/www.thi...81e0be5205.jpg https://cimg6.ibsrv.net/gimg/www.thi...0023c94be5.jpg What do you need? 89 GTA ttop. 5.7 auto. Engine blown. PM for pricing. |
Re: 1989 GTA partout PM sent |
Re: 1989 GTA partout I wonder if you would ship the 89 Service Manual stuff to germany? |
Re: 1989 GTA partout I have a 1982 T-top TA that was rear-ended... I need a new chassis to move my hardware to. I'd like to see if there may be a way to work something out. Best Regards, Paul |
Re: 1989 GTA partout Where are you located paul? |
Re: 1989 GTA partout Straight down 95 about 350mi, Port Saint Lucie, FL. I could bring a trailer... you could keep al the bits an pieces you'd like, I'd like to rotisserie to unit and move my hardware over. Is the body fairly rust free? |
Re: 1989 GTA partout
Originally Posted by 82turboTA
(Post 6329618)
Straight down 95 about 350mi, Port Saint Lucie, FL. I could bring a trailer... you could keep al the bits an pieces you'd like, I'd like to rotisserie to unit and move my hardware over. Is the body fairly rust free? |
Re: 1989 GTA partout could really use the driver side fender! sent about an hour south of Paul! |
Re: 1989 GTA partout Hey Jer, If you work that out with ssj2, I dont mind carrying south with me... |
Re: 1989 GTA partout Thats what we are discussing now. I have an 87 and the DS fender is busted pretty bad, and it’s red to! I can meet you where ever, I’m down in boynton
Originally Posted by 82turboTA
(Post 6329757)
Hey Jer, If you work that out with ssj2, I dont mind carrying south with me... |
Re: 1989 GTA partout
Originally Posted by ssj2link
(Post 6329758)
Thats what we are discussing now. I have an 87 and the DS fender is busted pretty bad, and it’s red to! I can meet you where ever, I’m down in boynton |
Re: 1989 GTA partout I know the area fairly well! We will be in touch
Originally Posted by 82turboTA
(Post 6329765)
You’d be welcome to pick it up at my house.. I’m just off 95 exit 118 in the tradition area... |
Re: 1989 GTA partout I will buy the radio pod if it is in fantastic condition with no broken radio/hvac mounting tabs. Will also buy the headlight control module. And the courtesy light socket in the driver side footwell. Just snip the wiring and give me about a foot of wire length. |
Re: 1989 GTA partout
Originally Posted by QwkTrip
(Post 6329810)
I will buy the radio pod if it is in fantastic condition with no broken radio/hvac mounting tabs. Will also buy the headlight control module. And the courtesy light socket in the driver side footwell. Just snip the wiring and give me about a foot of wire length. |
Re: 1989 GTA partout
Originally Posted by ssj2link
(Post 6329758)
Thats what we are discussing now. I have an 87 and the DS fender is busted pretty bad, and it’s red to! I can meet you where ever, I’m down in boynton https://cimg7.ibsrv.net/gimg/www.thi...f270647270.jpg |
Re: 1989 GTA partout Looks better then mine does. Shoot me a price on it |
Re: 1989 GTA partout
Originally Posted by jer4251
(Post 6329916)
I'll check on the radio pod. First time I'll be messing with a firebird interior. As far as removing the entire pod, I think there are two large screws at the top (13 mm socket), and a nut and bolt waaaaay in the back on the floor. The center console has to be removed to make way for the pod to come out. I can't remember if you have to remove the upper dash to get to those top bolts. If so then you'll have to remove the entire upper dash cover pieces. And you'll need to remove the lower dash on the passenger side to get access to more screws. Meanwhile, you don't dare pull and tug on that pod or the plastic top frame will break. It will come out with a pinky finger when it's ready to come out. |
Re: 1989 GTA partout I'm about to plastic weld the crack on the top bracket. Everything else is good and not broken. https://cimg0.ibsrv.net/gimg/www.thi...9f761a5e24.jpg https://cimg1.ibsrv.net/gimg/www.thi...557bc25d53.jpg https://cimg3.ibsrv.net/gimg/www.thi...a2a822bd9d.jpg https://cimg5.ibsrv.net/gimg/www.thi...af6002bd3a.jpg |
Re: 1989 GTA partout |
Re: 1989 GTA partout [QUOTE=jer4251 if the price is right I might want both fenders and maybe even the wheels and center caps. |
Re: 1989 GTA partout
Originally Posted by QwkTrip
(Post 6329967)
You can check the HVAC and radio mounts by just popping the bezel off with your fingers and dismounting the HVAC and radio. The radio mounts are usually broken. As far as removing the entire pod, I think there are two large screws at the top (13 mm socket), and a nut and bolt waaaaay in the back on the floor. The center console has to be removed to make way for the pod to come out. I can't remember if you have to remove the upper dash to get to those top bolts. If so then you'll have to remove the entire upper dash cover pieces. And you'll need to remove the lower dash on the passenger side to get access to more screws. Meanwhile, you don't dare pull and tug on that pod or the plastic top frame will break. It will come out with a pinky finger when it's ready to come out. |
Re: 1989 GTA partout
Originally Posted by jer4251
(Post 6330003)
It was cracked before I started to remove it. I cant take the blame on the upper crack. I'll send you a PM with a list of things and we can work out a deal. Thanks. |
Re: 1989 GTA partout Sent you a PM on the wheel caps, and center console lid. Thanks. |
Re: 1989 GTA partout
Originally Posted by Longshot08
(Post 6330244)
Sent you a PM on the wheel caps, and center console lid. Thanks. |
Re: 1989 GTA partout Got it. Thanks for the reply. |
Re: 1989 GTA partout How much for the windshield wiper, cruise control multi switch from the steering column? thanks |
Re: 1989 GTA partout I'm looking for rear PBR calipers. How much shipped to 95035? |
Re: 1989 GTA partout Wiper Motor and cover shipped to Huntsville 35761? |
Re: 1989 GTA partout I am writing this from my hospital bed. I’ve suffered a stroke. As it stands now, I am goin to focus on recovery. Right arm and face are affected pretty bad. This sucks big hairy donkey balls. |
Re: 1989 GTA partout How much for the seats and associated wiring. |
Re: 1989 GTA partout How much for the center console cover? |
Re: 1989 GTA partout Do you have any screw covers for the door handle screws? How much? |
Re: 1989 GTA partout
Originally Posted by Aviator857
(Post 6330691)
How much for the seats and associated wiring. Pickup only in Savannah Ga. |
Re: 1989 GTA partout
Originally Posted by PTS
(Post 6330816)
Do you have any screw covers for the door handle screws? How much? |
Re: 1989 GTA partout Does this car have an aluminum driveshaft? |
Re: 1989 GTA partout If you still have the steering wheel a close up and your price to 33435 thanks. |
Re: 1989 GTA partout How much for these parts: Door pull grommet And the 3rd brake light contact (form the hatch) Also, do you have the EGR Solenoid (rubber boot and hard lines from the base of the TPI Manifold and hard lines from this part?) Thanks. https://cimg0.ibsrv.net/gimg/www.thi...abc3e0d3c8.jpg https://cimg1.ibsrv.net/gimg/www.thi...20edf838f8.jpg |
Re: 1989 GTA partout how much for cluster shipped to 19809. le also do you a working headlight control module |
Re: 1989 GTA partout will the rear end bolt directly into a 91 Z28? |
Re: 1989 GTA partout Driver's sun visor, black shipped to 94954. Thanks. |
Re: 1989 GTA partout Are you still holding out to sell the wheel caps with the rims? Just checking, i the want caps😁 |
Re: 1989 GTA partout Do you still have the rear? |
Re: 1989 GTA partout Folks, on 10/6, I asked a question which is still unanswered. Not sure if this is still an active ad/listing, or not. OP, are you still selling parts, or? Thanks, |
Re: 1989 GTA partout
Originally Posted by Aviator857
(Post 6330691)
How much for the seats and associated wiring. |
Re: 1989 GTA partout
Originally Posted by Uncle Skeletor
(Post 6333507)
Does this car have an aluminum driveshaft? |
Re: 1989 GTA partout
Originally Posted by Big&BadGTA
(Post 6333784)
How much for these parts: Door pull grommet And the 3rd brake light contact (form the hatch) Also, do you have the EGR Solenoid (rubber boot and hard lines from the base of the TPI Manifold and hard lines from this part?) Thanks. https://cimg0.ibsrv.net/gimg/www.thi...abc3e0d3c8.jpg https://cimg1.ibsrv.net/gimg/www.thi...20edf838f8.jpg |
Re: 1989 GTA partout
Originally Posted by TOM305T/A
(Post 6333878)
how much for cluster shipped to 19809. le also do you a working headlight control module |
Re: 1989 GTA partout
Originally Posted by emuller2
(Post 6340992)
Do you still have the rear? |
Re: 1989 GTA partout
Originally Posted by jer4251
(Post 6341025)
the arm rest grommets are broken. I should have the egr stuff. And the brake light connector. Let me get my hands on them and I'll get you a price Ok. Let me know. And understand, life can get busy. On the armrest grommet, looking for the driver's side, if that one is still good. Thank you . |
All times are GMT -5. The time now is 08:39 PM. |
© 2024 MH Sub I, LLC dba Internet Brands