|
I have two seats from a '87 camaro. There red and not in the greatest shape. $20 obo for both. Also a camaro aircleaner assembly with everything except that line that goes to your carb, and maybe the wingnut and such to hold it down (can't find but know i saw it somewhere). $20 obo Accel cap and rotor kit unused. Its a female type cap and rotor. Mine is male so it wouldn't fit. Never used but is out of box though. $10 obo. If you take it all i'll lower it to $40 total. |
I would be most interested in purchasing one of your A/C delete air boxes for $20.00 Let me know if you still have one available. |
Still Looking Looking for this stuff still 1. Aluminum DS 1LE or LS1 2. After market tpi manifold base. Non vortec,perfer unported/will consider all though. PM me if you have anything. Conrad |
FOR SALE: This car, lovingly known as the JYD 2.0 http://www.outlawperformance.com/ima...-03/JYD2.0.jpg description and pics: http://www.outlawperformance.com/JYD2.0.htm Features of this car: 31 spline Moser 9”, with a posi, 3.50 gears (3:73 aftermarket gears included with sale) Solid heim joint suspension (Herb Adams) and custom sub frame connectors welded in 90/10 front drag struts T56 6-speed borg-warner transmission Hydraulic clutch linkage Steel Centerforce Flywheel, Ram 900 disc Accel gen-5 programmable fuel injection, single plane spyder EFI intake, 1000CFM TB Accel DFI integrated NOS Super Power Shot wet flow plate 75-175 hp nitrous system Brand new just released in box Edelbrock Victor EFI intake included with sale 355 short block balanced with forged pistons (very well worn enough to need replaced soon) Fresh modded Dart heads with Harlan sharp rockers, and comp valve train MSD-6AL True Dual 3” exhaust with “quicky” dumps and hooker “shortys” Fresh 28 x 10.5 ET streets included Car weighs 2800 pounds without any lightening yet! dont forget to watch the movie there of it running at bandemere in that link car located in cheyenne he is selling it for $3000 (considering all the parts its a steal!) 970-391-6091 don't leave message (voicemain screwed up) 307-638-8800 ask for brian |
Wanted. 1. 10 bolt posi disc brake rear end 2. Wonder bar 3. 1LE rear disc brake bracket (just one) 1Le front brakes 4. Edelbrock performer intake small chevy 5. Holley 600 double pumper 6. AC delete bracket/pulley 7. Dizzy to make my carb swap work 8. GTA wheels 9. TPI heads 10. TPI swap parts For sale. Parting grey 91 RS interior. Most everything is still there except for the carpet and sill panels. Shifter boot """"sale pending""" Come down here and get that sucker already.:) |
Originally Posted by Evil86Saleen
(Post 3148685)
Shifter boot """"sale pending""" Come down here and get that sucker already.:) PM me your phone number, so I can just give you a call to work this out. Later, Brandon |
I've got a set of TPI heads for you what will you give me for them? ---------- Hey Tom if he decides to part it out let me know I"m intrested in a few of the parts I wish I had the money for the whole thing I'd be all over it. That's a killer deal |
Ok I also have a set of Moser 28spline axles for a thirdgen that I need to get rid of would make a great christmas present for someone. |
Originally Posted by 91RamAir Formula
(Post 3149455)
I've got a set of TPI heads for you what will you give me for them? ---------- Hey Tom if he decides to part it out let me know I"m intrested in a few of the parts I wish I had the money for the whole thing I'd be all over it. That's a killer deal 40 bones ok? kyle |
Originally Posted by 91RamAir Formula
(Post 3149509)
Ok I also have a set of Moser 28spline axles for a thirdgen that I need to get rid of would make a great christmas present for someone. |
ok first the heads are good they work fine but I would probably rebuild them just for good measure they are stockers with about 130K on them. price sounds perfect. And Brandon Santa needs gas money for delivery's like that, I paid 200 for them and they were used for about a year and a half. I'd like to get half that |
Originally Posted by 91RamAir Formula
(Post 3150794)
ok first the heads are good they work fine but I would probably rebuild them just for good measure they are stockers with about 130K on them. price sounds perfect. And Brandon Santa needs gas money for delivery's like that, I paid 200 for them and they were used for about a year and a half. I'd like to get half that kyle |
I've got Two Sets of trans am grid lights and one wiring harness to go with. looking to get $75obo 20lb nitrous bottle $225 obo send me a pm if interested |
TH400 swap Anyody interested in complete swap setup? The trans is a fresh, upgraded, full manual valve body TH400 out of a BB truck, the valve body is an aftermarket unit- not a converted OEM piece. The convertor is a billet NOS/blower convertor from Art Carr with ballooning plates and rated to 1000+ hp. Also includes Hurst crossmember, Cheetah SCS shifter, braided AN lines, etc. Lot more details but don't want to type a book about it. All this stuff is 99.9 percent new, no junk. Will sell the trans only or complete setup. Price and payment terms are open for dicussion:) |
what size is the stall? and what are you asking for the setup? |
2800. It's a custom built 10" convertor, billet steel cover, 4130 hub, heavy duty sprag, etc. Art Carr calls it their "TH350/TH400 H/D Super Torque" convertor. Forgot to mention that I have a custom built chromoly driveshaft for this setup. Like I said, the price is negotiable. Somebody is going to get a great deal cuz I got an azzload of money in all this stuff. If you're seriously interested I can PM you my number and we can talk more about it. |
yea pm me! |
PM'd ya. |
Hey guys, I need two things - the first is a real short length of header-wrap fabric (maybe two feet or so), and the second is the plastic "hamster wheel" fan that's found inside the heater core box assembly - I need the one for NON-A/C cars. I need the header wrap so that I can try to cushion my exhaust from banging against my pass.-side SFC, and the fan so that I can get all of that put back together again. I'm willing to pay a reasonable amount for each. :) UPDATE (2/13/2007) - I've gotten the fabric, & just may have a line on the fan, but still interested, just in case... |
Still have this thing. I still have a 2400 stall for the 700R4 tranny. Made by Quality Custom Converters out of Rochester, NY. Will trade or take cash. Never ran it, just put it in then right back out to have the tranny rebuilt. So if any of you locals are pulling your tranny and want to upgrade let my know. Will trade for: Aluminum driveshaft After market LCA's or panhard bar $100 Still has waranty. Here is the old link. https://www.thirdgen.org/forums/sout...all-700r4.html Just want it gone. Conrad |
I need some parts. It does not look like anyone has posted here for a while. These are some of the parts I need. How much I buy will depend on the cost. Not looking for junk parts for I have those already ha,ah. Rear Diff Complete w/possi set up for disk brakes, 700R4 transmission, A/C delete heater box, dash pad, front seats. My list goes on but this is most of the important stuff, And please dont beat me up!!! :search: |
FS: Firebird RA II hood 1 Attachment(s) Love the hood but it's time to do something different. Going to a lighter race type hood instead of one with a fully finished underside. $350 obo. |
That's a pretty good price on the RA II hood, if I was looking for one of those, I'd be all over it! BTW, if it seems that this forum is a bit dead lately, you might check out the other local hangout where we also spend a bit of time... ;) |
:iagree: |
WTB: 85-90 t/a rear bumper, 85-90 t/a drivers side fender, 4th gen posi rear axle with 3.23, 3.42, or 3.73 or maybe 3rd gen rear, 95-97 4l60E Would prefer nebraska but if someone in colorado has ALL of these then maybe... |
Needin a shift cable !! If anybody has a shift cable for a third gen (83 Z28 Crossfire) I really need one!! I bought an aftermarket cable but where it snapped in to the round holder wouldn't fit as it was just a tad smaller than a GM original and it flopped around and I still couldn't shift correctly and ended up killing the "new" cable !! So...I'd love to find a used GM original and I know that that will fit properly!! |
Re: THIRDGEN SWAP MEET!!! Today my Edelbrock BBK 89-92 TPI 58mm TB, 1206 gasket port matched edelbrock lower, and my Accel SuperRam went up for sale. $1700 for everything, or you can bid for them and get them much much lower in my auctions on ebay under the same name I use here (no caps) http://motors.search.ebay.com/_W0QQsassZb4ctom1 |
Re: THIRDGEN SWAP MEET!!! Hello All, Does anyone have or know were to get the Z28 rocker emblems for a 91 Camaro, I have lost the drivers side (maybe someone needed it worse than I did) I would like a pair if I could find them. Thanks Pat |
Re: THIRDGEN SWAP MEET!!! Hey- I got a set of REAL Y2K Vette wheels and tires for sale. Fronts have practically new BFGoodrich TA KDWS tires on them. Rears have Michelins that are pretty bald (wonder why?) and will more than likely need replacing. I was looking to get $800 for the whole set, but they need cleaned up. I haven't had them on my Camaro in over 2-1/2 years. Lemme know. Reasonable offers will be accepted. |
Re: THIRDGEN SWAP MEET!!! Anyone local have a 3rd gen 10 bolt rear with posi and around 3.73's for gears? Might even consider a 9" 3rd gen rear. |
Re: THIRDGEN SWAP MEET!!! I am having to thin out my car collection (5 so far) due to room and time...not to mention my wife not being happy with all my stuff. I am selling my 89' Firebird 305tbi auto for $2800.00 or best offer. The Bird goes with a truck load (and I do mean TRUCK load) of new and used parts. The bird has the 140 speedo and 8 grand tach, the whole cluster was rebuild a year ago. Cold A/C, pwr windows, locks, p/s, p/b, tilt, pwr hatch pull down (working properly due to rebuild), 00' seats and console, 16" formula wheels. The bird is a work in progress, but I just don't have the time to finish it. There is lots more info and parts but not enough time to list all. Call me and I will give as detailed a list as I can remember. Don't get me the wrong way I LOVE this car but would love to see it go to someone that can find the time to finish where I started. Thanks Doyle 713-206-2634 Longmont, Co. http://www.autotrader.com/fyc/vdp.js...ice=&cardist=0 |
Re: THIRDGEN SWAP MEET!!! i figured i would blow the dust off of this one i am looking for a set of seats if any has some siting around and if some one that has a TBI V8 auto that wants a 12.1 5 speed car maby we can talk it has a 4.56:1 disk posi rear 5 speed and one hell of a motor the car is kinda needing some work but not a total pyle starts and drives fine just not what i am wanting i got to mutch when i got this car and dont have the fun i want |
Re: THIRDGEN SWAP MEET!!! Glad to see this still sorta goin, I need to find a RT side door for 89 base firebird, I really don't want skin it, I still need to look in salvage too. I have two wheels, no tires off an 88 RS or SC not sure on the maro trim levels. They are 5 spoke, the salvage crackies stole the other 2 wheels from the shop I work at. =] -h3adrush dc719.org oh im in Colorado Springs |
Re: THIRDGEN SWAP MEET!!! how mutch you want for the rims ? thanks |
Re: THIRDGEN SWAP MEET!!! I live in Cheyenne, WY now. I have, Blue RS Hood, Blue 3 piece spoiler, Hatch pulldown motor (Bought from ebay, didn't end up needing it) I might have some other stuff I can't exactly remember. |
Re: THIRDGEN SWAP MEET!!!
Originally Posted by JohnnyIROC-Z
(Post 3732834)
I live in Cheyenne, WY now. I have, Blue RS Hood, Blue 3 piece spoiler, Hatch pulldown motor (Bought from ebay, didn't end up needing it) I might have some other stuff I can't exactly remember. |
Re: THIRDGEN SWAP MEET!!! 1LE front rotors with inner/outer bearings, 1LE rear rotors as well. Both sets need to be turned (for the first time). $50 for pick up in the Lawrence, KS, area. JamesC |
Re: THIRDGEN SWAP MEET!!! hi there anybody got any convertible parts for and 89 RS think i need almost everything. |
Re: THIRDGEN SWAP MEET!!! Wow dont know how I missed this before. I have. -Stock torque arm for 7oor4 that mounts on tailshaft. -Stock panhard bar -Stock lca`s -stock driveshaft (has a conversion u-joint in the rear for my 12 bolt). -Factory Firebird Wheels 15X7 with 215/65/15 tires. -Set of Progressive Ultralight Aluminum Wheels ( Look just like American Racing Outlaw 1 wheels). 15x7 with some nice Goodyear 215/65/15 tires. - Canton Aluminum coolant overflow tank -14X3 Crome air cleaner for 4 barrel carb Thats all I can think of right now. Would be willing to ship the Air Cleaner and Overflow tank but all other parts are for local pickup in KC Kansas area. |
Re: THIRDGEN SWAP MEET!!! :driving: Guys I live in Longmont and I am having a garage sale. ALL PARTS MUST GO----WILL TAKE BEST OFFER---- Most of these are off of my 89' Firebird. List of parts: 1990 Formula Hood- $225.00 Black Door panels- $225.00 Black Kick panels w/carpet- $45.00 Black Door sills- $20.00 Black Dash Pad PERFECT- $250.00 Headlamp Assy. $100.00 ea. Hatch motor assy. $100.00 Tail lamps Rh or Lh $40.00 ea. 16" Formula wheels 8"frt and 8" offset rears $400.00 set Doors trimed & primed $100.00 ea. Glass for doors perfect $50.00 ea. Instrument cluster 140mph 8g tach $50.00 Radiator new/used $50.00 EIBACH springs 1.5" drop used $50.00 set SLP 3" Catback sys. used $250.00 Edelbrock Headers w/AIR used $50.00 Console Overhead $40.00 Seals (call for info) $75.00 ea. MIsc Body Parts Call for price. CELL #713-206-2634 WORK #303-554-3017 |
Re: THIRDGEN SWAP MEET!!! I have some rear interior trim panels just sitting in the garage. They're gray in color and are intended for the 89 and earlier cars with the rear lap belts. They are all in good condition. I originally bought them for my car before I realized that I had rear shoulder belts. If anyone is interested send me a pm. |
Re: THIRDGEN SWAP MEET!!! Hmmmm. Doesn't look like this thread gets used much.... But anyway, I have a bunch of leftovers from my '82 Berlinetta build....All way too heavy and or bulky to ship... Both doors--decent shape, no rust holes Grey front and rear seats--structurally good but dirty, no big rips or anything.---SOLD Power steering pump and steering box--came off a running car--dirty but functional\ Lots of the grey plastic interior panels. Lots of little stuff, ask if you need something, maybe it's still here..Though a couple of kids in town that have Camaro's have raided the collection from time to time!!! Rear hatch, tinted with defroster, no idea if it works.... Just make an offer, I'm not trying to get rich on any of the parts, just want to see them go to a good home.... Trades are always welcome!!!!! Have to admit I'm primarily a Ford guy, so if you have any good Ford pieces around to trade, let me know. Oh yeah, please note my location---I'm about 50 miles northwest of Sioux Falls..... and as I said, most of this stuff is big and heavy, probably not feasible to ship..... |
Re: THIRDGEN SWAP MEET!!! 1. Doeskin Tan color interior plastics for the trunk, T-Top Headliner, T-Top Sunvisors, carpet, doors, seat belts. 2. center console light 3. 82-84 Firebird Trans Am driver's side Fender with air collector vent. + RH and LH air collector vents 4. 82-84 hook style t-tops 5. fuel pump sending unit for crossfire fuel injection 305CI V8 S VIN code 6. 15 inch Bowling Ball Hub caps 7. 1982 Trans Am round shifter 8. 1982-1984 gauge cluster 9. 1982-1984 305ci V8 mechanical fan shroud |
Re: THIRDGEN SWAP MEET!!!
Originally Posted by cherryred89
(Post 2936700)
Nick!!!!!!!!!!!!!!!!!!!!!!!!! I need that fan man well my son needs it we have an aftermarket on his an its no doing the job especially in this heat name your price but dont beat me up:) |
Re: THIRDGEN SWAP MEET!!! 2 Attachment(s) hay guys what do you think about this look???? this is my spare center console by the way lol |
Re: THIRDGEN SWAP MEET!!! Hey All!! I just aquired a '86 bird. I need several pieces from it, but am parting out the rest. The best detail, this car has a functional formula hood!! The entire front clip drivers door, rear bumper, trans, driveshaft are all in great shape. Too many parts to list prices, but no reasonable offers refused! |
Re: THIRDGEN SWAP MEET!!! i have a 82-84 camaro that i am parting out pm me for a part i will take a picture of the part and see if you want it |
Re: THIRDGEN SWAP MEET!!! i posted some 87 camaro parts in the body forum, just figured out i shouldve put them here-sorry |
Re: THIRDGEN SWAP MEET!!! 91 rs teal parts, both doors, t-tops, radiator (305)+condensor, 2 wheels. more info check out omaha craigslist, car parts section. May be able to deliver to Wichita KS. |
Re: THIRDGEN SWAP MEET!!! Does anyone have any glass T-tops for sale somewhere around northern CO or in WY? |
| All times are GMT -5. The time now is 03:35 AM. |
© 2024 MH Sub I, LLC dba Internet Brands