THIRDGEN SWAP MEET!!! Please make this a sticky. I have noticed in a few other places on the board that they have a swapmeet section for there region. I think we need one of these. Better to look local then ebay ect... List all parts you have in your garage or shed or wherever. Parting out a car ect... Must have prices. Almost everybody needs SOMETHING for there car. Weither its a arm rest or your may be wanting to trade a pass mirror for a driver. Ect..... POST AWAY!!!! |
I need a passenger side door in a couple weeks for a 85-90 T/A. I don't think I'll go outside nebraska to pick it up. Parts I have: Passenger side T-top, American Racing Sniper???? Rims - 16"x7.5" pulled from a 95 camaro - $200. From 86 LG4 T/A: a/c compressor, a/c lines, cruise control servo, never used headlight(not headlight motor),ebrake handle, some emissions stuff, and smog pump. From 92 Firebird: Used foglight. Wicked T/A - Is this kind of what you meant? |
Got a perfectly good alternator from my IROC. It's an 87, so it would have the 12 o'clock and 6 o'clock mounting points. Took it off when I went to the serpentine setup......one 6-pack of Sunshine Wheat is the price. :) |
Wiring harness, computer, and carb for a CC Qjet carb setup. Off my 84 L69 auto. $50 obo. Coolguywalt I will give you a TWELVE pack of Sunshine Wheat in trade for your TTA!!!!!!! |
Hmmmmm, a 12 pack, huh? Wait, what am I saying! Also found an instrument cluster from a 87 Camaro V6 (so it has the lights and big ol' fuel gauge) for another 6 pack! |
This is exactly what i had in mind. I got rid of all my 3rd gen stuff when i sold my last one. Therefore i dont have anything to offer yet. Everybody knows they have abox of just odd crap that they dont know what to do with. Well, now ya do! LOL |
Where to begin... .040 over pistons, rings, crank balanced to these pistons, cam (no idea on specs), TPI runners and manifold off of 92, stock 22# injectors, and even a tire to put an engine on. I'm sure there is more, but I can't think of much more right now. At this point we will be happy to get rid of the stuff so a bunch of it will either go to you guys or the junk yard (so take it now for free :welcome: ). Oh and somewhere down the line will be a stock red RS hood that is in damn good condition. |
I got a camaro bumper, two different firebird bumpers, a lot of **** really. If you have something on your mind let me know and I probably have it.:) |
Anybody have any door locks or hatch lock? What about a headlight trim ring for bird? Actually need 2 of those. EDIT. Also need a pass side GFX. Its the one that is right behing the front bumper just in front of the pass wheel. |
Originally Posted by HaloNick Where to begin... Oh and somewhere down the line will be a stock red RS hood that is in damn good condition. Let me know on the hood man I need it badly. My son and I are working on his new car and it needs a hood. please let me know ASAP. I dont care what color it is the car is already blue black and white:crazy: |
My kind of post Well here we go........ 1 set of glass T-Tops locking no key $20.00 (or best) A set of side ground effects from a 92 Z28 great condition ($100.00 or best) 92 Back bumper from a 92 Z28 great condition 100.00 (or best) 3 back glasses $20.00 (you pick up) Complete gray interior minus door panels 30.00 (or best) TPI plenum and runners (name your price) One set of IROC grid style tail lights $60.00 (or best) I have more odds and ends but can't remember all of it. and all prices are negotiable no shipping you pick up. I do need a Camaro hood so keep that in mind. |
Originally Posted by HaloNick Where to begin... .040 over pistons, rings, crank balanced to these pistons, cam (no idea on specs), TPI runners and manifold off of 92, stock 22# injectors, and even a tire to put an engine on. I'm sure there is more, but I can't think of much more right now. At this point we will be happy to get rid of the stuff so a bunch of it will either go to you guys or the junk yard (so take it now for free :welcome: ). Oh and somewhere down the line will be a stock red RS hood that is in damn good condition. |
Wow - I figured that when Russ got on this post, it would go on for 3 or 4 pages! :lmao: On a more serious note, somewhere around here, I've got a vacuum secondary Holley 750 carb that was built for the cammed 355 in my old pickup... And here shortly, I'll have the following that I'll be looking to clear out: * A TPI base, runners, & ported plenum (maybe); * A set of eight 24 lb/hr ADS "Super Injectors" (less than 20k on 'em, supposed to have a lifetime guarantee against clogging) - another "maybe" as it's starting to look as though I'll need to step up to 30 or 32# units; * A pair of L98 heads, milled .005", & with a 3-angle valve job; * A stock L98 hydraulic roller cam, less than 80k miles on it; * A stock L98 crankshaft (1-pc rear main seal) again, less than 80k miles on it; * A set of stock (stamped) rear lower control arms (nice to have an extra set to have boxed, so you don't have any down-time); Finally, sometime around this fall, I'll probably be looking to sell my 700R4 auto tranny, & maybe my stock radiator as well.
Originally Posted by WickedTA Please make this a sticky. |
Originally Posted by Crazy Firebird Kid Are the pistons, rings, and crank used? If so how many miles on them? |
Originally Posted by HaloNick They look used, but look to be in good shape. If I had to guess, I would venture a guess of less than 20,000 miles on them. |
Ok, I have a set of ultma seats out of my gta(front and back). They need recovered but other than that they are in good shape, the lumbars supports work fine, the back seat is the split rear. They are cloth. FREE to good home. You must pick them up. Conrad |
Ok I'v got all kinds of stuff I've got pre 91 TA tail lights, a 91 TA rear bumper A set of moser axles for a thirdgen 24lb injectors chip burning software and burner/reader plus the needed adapters, stock L98 block, heads, cam I've got a comp retro fit hydraulic roller cam that needs to go. and I'm sure there's more I'll add on when I find more goods. |
Originally Posted by twobirds Ok, I have a set of ultma seats out of my gta(front and back). They need recovered but other than that they are in good shape, the lumbars supports work fine, the back seat is the split rear. They are cloth. FREE to good home. You must pick them up. Conrad What color? Any pics? |
Originally Posted by 91RamAir Formula ...chip burning software and burner/reader plus the needed adapters, stock L98 block, |
Hey Mark, would that retrofit roller cam work on my flat tappet??? If so how much you want for it??? |
Originally Posted by WickedTA What color? Any pics? ----------
Originally Posted by 91RamAir Formula Ok I'v got all kinds of stuff I've got pre 91 TA tail lights, a 91 TA rear bumper A set of moser axles for a thirdgen 24lb injectors chip burning software and burner/reader plus the needed adapters, stock L98 block, heads, cam I've got a comp retro fit hydraulic roller cam that needs to go. and I'm sure there's more I'll add on when I find more goods. |
Originally Posted by Crazy Firebird Kid Forgot to ask if the pistons were domed, dished or flattop? |
Well Sasa the cam will work in a hydraulic flat tappet motor but you will have to buy retrofit hydraulic roller lifters to go with it, as well as a cam button. I would like to get a $100 for it. I've also got a Yank 2800 stall. |
Anybody have a Edelbrock or Holley 600 carb? Gonna use a 750 to get it going, but I'm just borrowing it, so I need a carb, and I think a 750 is overkill for my setup. |
Anybody have the pass side fender GFX for trans am? |
I actually might have the side fender gfx. I just gotta check which one I cut up. Lets hope its the driver side. I'll let you know. |
Thanks, Let me know |
stock steering wheel from my 92RS WITHOUT the airbag front grill and license plate holder from the same 92RS Vacuum canister with custom made mount bracket K&N Stubstack for holley carb Thrust Roller bearing for timing chain Stuff that all needs to go somewhere it can be used, it will be cheap + shipping |
I also have a pair of aero GFX for the doors. Its the DOORS ONLY. |
I have alot more stuff but like V8Rumble said it will take 4 pages to list it all. I need to get alot of this stuff out of here before my wife has a fit. And my shed is filling up with parts I can barely move in there as it is. |
Need to add after trip to garage: Set of rear seats, one piece upper and 2 lower pieces, RED in color, no rips at all, removed from my 92RS Set of 16 stock roller lifters Set of 16 stock pushrods Comp 286H cam and lifters set of rear seatbelts RED from 92RS Set of 16 springs removed from my AFR heads when i put on the roller cam springs. |
How much for the seatbelts, and what condition are they in? |
hey slush.. what are you after for your rear seats and seat belts? |
....................... |
I found a vert top that I was going to put on my old 92 bird. It is black with plastic window, it is used but in great shape. Best offer. Conrad |
I've got the rear hatch/glass minus the middle 3pc. spoiler, and primered pass. side door w/electric windows AND the glass. They're off an 83 z28. I don't have a truck (or anyone with one) so it'd be pickup only Hey, Slush, keep us updated on what parts you have :D |
I also found a pass side headlight suround for trans am. |
Since we have hooked up the dual fan setup, I now have the single fan setup. I have the fan, radiator cover, and lower mounting piece. |
Nick!!!!!!!!!!!!!!!!!!!!!!!!! I need that fan man well my son needs it we have an aftermarket on his an its no doing the job especially in this heat name your price but dont beat me up:) |
I have two A/C deletle air boxes for sale. No blower motors..just the boxes. $20.00 each. Conrad BOTH ARE SOLD |
Correction - you have ONE a/c delete box for sale... ;) :lol: I'll pick the other one up from you today if you have time. |
89 rs in colorado springs real clean for sale see the cars for sale forum |
For sale: one wonder bar off 88 Iroc-z $25.00 Conrad **SOLD** |
Let's see what else I have sitting around now:
|
How much for the exhaust???? My tranny is slipping and making some noises. I am looking for another one. 700r4 if any of you have one, or are planning on pulling it out etc... Let me know, i have a small budget so (in Russes words) don't beat me up!:lmao: I will entertain any offers, or trades/partial trades! |
I have some stock springs off of my 1989 iroc if anybody is interested,shoot me a price! NORT |
i need a front bumper cover for a 84 trans am and both fenders. i also need a rear bumper for a 87 z28. pm me if you have anything! |
I have near perfect '84 firebird taillights, amber fog lights a few emblems, a whole box full of misc. parts.:) I just found a Rochester carb, ran good when I took it off (its from an 81 chevy p.u.) a 5speed shifter console, dirty but nice. |
Looking for a aluminum DS. LS1 or 1LE. PM me if you have one. Conrad |
I have a dual snorkel air box, $100 shipped. I also have an Lear Siegler Conteur seat and accompanying pass seat both of which have been reconditioned and reupholstered, $150 shipped. I can provide the GM part numbers of the material so that the rear seats could be copied (black with tweed inserts). Pics of both are available. JamesC |
All times are GMT -5. The time now is 05:32 PM. |
© 2024 MH Sub I, LLC dba Internet Brands