Third Generation F-Body Message Boards

Third Generation F-Body Message Boards (https://www.thirdgen.org/forums/)
-   TPI (https://www.thirdgen.org/forums/tpi/)
-   -   HELP!! 89 gta with 85 harness and 86 ECM (https://www.thirdgen.org/forums/tpi/752736-help-89-gta-85-a.html)

91rsproject 04-29-2018 07:08 PM

HELP!! 89 gta with 85 harness and 86 ECM
 
I have a 89 gta trans am. When i bought it the car had a carb and didnt have the TPI system. After months of digging i found a set but i was told it was off a 85 Camaro z. So the harness plugs in and hooks up, but i cannot get it to fire . i put some gass in the tb, and it fired up. I have narrowed down to the injectors not pulsing. I also had to bridge the fuel pump to get it to kick on.

I have searched the vats forums and i cannot figure out what the heck is going on. I have checked all kinds of parts of this. i have 12v on both injector wires. i have spark, i have 42 lbs of fuel pressure. there were some wires i could not figure out what they went to but the car starts and runs if i spray or put fuel in the tb.

Can anyone help me please.

Tuned Performance 04-29-2018 07:10 PM

Re: HELP!! 89 gta with 85 harness and 86 ECM
 
http://f-body383.tripod.com/AAB/870-...pRepinning.htm
Not sure what was from the 85 the tpi harness or ecm, the ecm wouldn’t have vats.
If your use of the 1227165 ecm it would have vats. It’s not a plug and play in the 85 harness.
https://www.thirdgen.org/forums/elec...pass-vats.html

91rsproject 04-29-2018 07:11 PM

Re: HELP!! 89 gta with 85 harness and 86 ECM
 
So i have to repin it all?

Tuned Performance 04-29-2018 07:16 PM

Re: HELP!! 89 gta with 85 harness and 86 ECM
 
Or get a different harness one for a 88 -89 would be the best since the alternator is on the drivers side. 88 has provision for the ninth injector so it can be left unplugged.
C100 might be different as well .
The 1227165 ecm was used in f body’s 86-89

91rsproject 04-29-2018 08:25 PM

Re: HELP!! 89 gta with 85 harness and 86 ECM
 
ok doing reserach looks like maybe the harness is maybe from a 86 as well. have the 259 ecm. so i shouldnt have to splice any wires.

Tuned Performance 04-29-2018 08:31 PM

Re: HELP!! 89 gta with 85 harness and 86 ECM
 
259 is a superseded number for the 165. The memcal letters can tell if it’s for a 88-89 vats started in some 88s f body’s and 86 in the y platform.
If your fighting injector pulse you might have a bad icm. You can have spark but no injector pulse with a bad icm .

91rsproject 04-29-2018 08:34 PM

Re: HELP!! 89 gta with 85 harness and 86 ECM
 
what is the memcal lettters?? How do i tell if the vats system is not pulsing the system. is there a way to just bypass it without the key or resistor?? this does not have vats key.

Tuned Performance 04-29-2018 08:38 PM

Re: HELP!! 89 gta with 85 harness and 86 ECM
 
You can post the letters on the memcal (computer chip) and I’ll see if I have that file to see if it has vats.
If the harness is from 85 you would have a plug like this next to the ecm for the maf burn off module.

https://cimg3.ibsrv.net/gimg/www.thi...969180f2c.jpeg

https://cimg4.ibsrv.net/gimg/www.thi...482de6332.jpeg

91rsproject 04-29-2018 08:49 PM

Re: HELP!! 89 gta with 85 harness and 86 ECM
 
No i do not have this box. i will get the number tomorrow. I just want to figure out why and get this damn thing going.

91rsproject 04-29-2018 08:52 PM

Re: HELP!! 89 gta with 85 harness and 86 ECM
 
ok AUM 01228291, and 6243 1621 3684

Tuned Performance 04-29-2018 08:55 PM

Re: HELP!! 89 gta with 85 harness and 86 ECM
 
Aum is from a 86 tpi 305 automatic. Your not battling a vats issue .

Tuned Performance 04-29-2018 08:58 PM

Re: HELP!! 89 gta with 85 harness and 86 ECM
 
Have you checked that the check engine light comes on. The fuel pump and ecm power are tied together and fused bye a 20 amp fuse next to the battery.

https://cimg6.ibsrv.net/gimg/www.thi...d4642a37d.jpeg

https://cimg7.ibsrv.net/gimg/www.thi...34bf12876.jpeg

Tuned Performance 04-29-2018 09:11 PM

Re: HELP!! 89 gta with 85 harness and 86 ECM
 
Another thing to test is that the purple/white wire is hooked up. It’s ecm tach reference.

https://cimg7.ibsrv.net/gimg/www.thi...a99d715b1.jpeg
Another thing that can cut injector pulse is if more that 4 volts if feed back from the tps.
Blue is tps signal gray is 5v reference.
Or another possibility shorted injectors shutting down the injector driver.


All times are GMT -5. The time now is 06:43 PM.


© 2024 MH Sub I, LLC dba Internet Brands