vid clips from today got rained out at the track,but hers a few SHORT clips if messing around on the street the only decent pull was the 4-5 sec wot run from 40-45mph every thing else resulted in wheel hop and or tire spin http://thumbs.streetfire.net/6231dde...a301600273.jpgjust messing around going to the track on friday to make runs |
Re: vid clips from today ^ Nice clips! You pulled that Trans Am in the last clip pretty freaking hard, but was he even racing though? Looked like he might have been on the phone, talking to the wife, but hey, how the heck would I know lol. Very nice bro, that Camaro pulls very very hard! Can't wait to see what she does at 15-psi.... :nod: |
Re: vid clips from today
Originally Posted by Street Lethal
(Post 3764089)
^ Nice clips! You pulled that Trans Am in the last clip pretty freaking hard, but was he even racing though? Looked like he might have been on the phone, talking to the wife, but hey, how the heck would I know lol. Very nice bro, that Camaro pulls very very hard! Can't wait to see what she does at 15-psi.... :nod: |
Re: vid clips from today ^ All things running smooth, and with boost upped closer to 14-psi, and that thing will break 12's with the current turbo charger that's already in there. First time I seen the turbo setup in person fella's, and lemme tell ya, impressed would be an absolute understatement. It came out freaking awesome, and the engine pulls very hard with moderate boost.... :thumbsup: |
Re: vid clips from today
Originally Posted by Street Lethal
(Post 3764334)
^ All things running smooth, and with boost upped closer to 14-psi, and that thing will break 12's with the current turbo charger that's already in there. First time I seen the turbo setup in person fella's, and lemme tell ya, impressed would be an absolute understatement. It came out freaking awesome, and the engine pulls very hard with moderate boost.... :thumbsup: was hoping to get to race that nice ls1 transam but it didnt follow us onto rt 18 :( roflmao :eek::idiot: how about a run on friday rob ??? im swaping the rear gears and putting the slicks on for tom |
Re: vid clips from today
Originally Posted by project89 how about a run on friday rob ??? im swaping the rear gears and putting the slicks on for tom |
Re: vid clips from today
Originally Posted by Street Lethal
(Post 3764363)
Umm, maybe if you HELP ME PULL THE CAT'S OFF FIRST, THEY'RE CLOGGED....!!!!! :lmao: ;) |
Re: vid clips from today
Originally Posted by project89 lemme make a few phone calls maybe after 6pm i can make something happen |
Re: vid clips from today
Originally Posted by Street Lethal
(Post 3764368)
Lemme take pics of the exhaust for you ahead of time, this way you know what your dealing with. The '98's are different from the newer models, as only one cat is next to the engine (drivers side), the other is in the same location as the 3rd gen's. Also, the tubing is very different, so it'll give you an idea ahead of time how we're gonna do this.... |
Re: vid clips from today
Originally Posted by project89 that be great the one car i did headers on was a 2000 i believe and those cats were a mother ****er to get to |
Re: vid clips from today |
Re: vid clips from today ^ In case anybody is curious, the hole in front of the cat in the first pic was drilled to allow for a pressure reading. The cat is almost plugged up completely.... |
Re: vid clips from today easy **** then |
Re: vid clips from today I've had my share of clogged converter's in the past, but this is just ridiculous. They are bad, really bad bro, they need to be tossed asap. A fresh set of high flow converters will eventually be going in along w/the new headers and exhaust (whenever I decide on which ones lol), but for now, I need to be able to drive the damn car, let alone start it lol.... ;) |
Re: vid clips from today |
Re: vid clips from today Those headers are sweet, but would you be able to fabricate the rest though? One of the member's on another board kind of peaked my interest with his setup that a local Jersey shop fabricated for him....; https://i201.photobucket.com/albums/...ualExhaust.jpg |
Re: vid clips from today http://cgi.ebay.com/ebaymotors/OBX-H...QQcmdZViewItem ----------
Originally Posted by Street Lethal
(Post 3764439)
Those headers are sweet, but would you be able to fabricate the rest though? One of the member's on another board kind of peaked my interest with his setup that a local Jersey shop fabricated for him....; http://i201.photobucket.com/albums/a...ualExhaust.jpg |
Re: vid clips from today ...... |
Re: vid clips from today
Originally Posted by project89 not duals liek that i would go single 3 inch utilizing the factoy back from the y pipe |
Re: vid clips from today just fab the ypipe oh i know what the factory ypipe looks liek lol its a mess. ill know in a lil while if the shop is clear so gimmie about 30-45 mins |
Re: vid clips from today ^ Yeah, lemme know bro, cuz Shawn is egging me on with his newly aquired T-Type for tomorrow night.... :lol: |
Re: vid clips from today
Originally Posted by project89 how about a run on friday rob ??? |
Re: vid clips from today
Originally Posted by Street Lethal
(Post 3764613)
Got Shawn wanting to run you now too.... :lol: :nod: |
Re: vid clips from today 3 Attachment(s) ^ Pics of Shawn's new ride.... :nod: It's been sorta modded since then though lol.... ;) |
Re: vid clips from today ohh thats ****ing cleannnnnnnnn, is that a stock turbo i see?? hehehehe |
Re: vid clips from today
Originally Posted by project89 ...is that a stock turbo i see?? hehehehe |
Re: vid clips from today
Originally Posted by Street Lethal
(Post 3764627)
Once upon a time.... :D |
Re: vid clips from today ^ Curious to see what it runs, he's done some very extensive work to it, and Paulie tuned it. He's got the alky injection already installed, so I don't think either one of us will stand a chance against him. Without a doubt, low 11, high ten second T-Type, all depending how well he hooks tomorrow night, of course. |
Re: vid clips from today i was just gonna say whats he running liek 28#'s of boost lol,alls i have to say is wait till i get the 70mm turbo on and crank the boost to around 25psi |
Re: vid clips from today ^ I'm rooting for you bro, I really am, but it appears the Grand Nationals will be cleaning our clocks tomorrow night. Already know that Shawn is going to take me, the question is though, by how much lol. Hopefully I can get inside of his head before we get to the tree, throw him off by a second, or ten mwuahahahaha.... :lol: |
Re: vid clips from today
Originally Posted by project89
(Post 3764456)
just fab the ypipe oh i know what the factory ypipe looks liek lol its a mess. ill know in a lil while if the shop is clear so gimmie about 30-45 mins |
Re: vid clips from today
Originally Posted by firstfirebird
(Post 3764696)
While you are there, would you grab my TB? |
Re: vid clips from today
Originally Posted by project89
(Post 3764701)
told you i would when im there,ill be there tom to fix robs car and mount my slicks Just got to get the skeleton of a 3.1 (block and crank is all that's left) out of the car and do some pressure cleaning and painting - don't want to drop this work of art in a dirty bay, lol. Then it's on to mocking/welding headers, woot. |
Re: vid clips from today hey u still got those junk iron heads, the un rebuildable ones?? |
Re: vid clips from today
Originally Posted by project89
(Post 3764711)
hey u still got those junk iron heads, the un rebuildable ones?? I also have the heads from the 3.1 with 89k miles on them... |
Re: vid clips from today
Originally Posted by firstfirebird
(Post 3764714)
They're rebuildable, just have to extract some broke exhaust bolts, lol. I also have the heads from the 3.1 with 89k miles on them... |
Re: vid clips from today Youl'd probably be better off going to a scrap yard, shipping won't be cheap. I weighed the iron top end and it was 85lbs, the 3x00 top end weighs 35lbs, lol. I can weigh them right now while I'm still here at the shop if you want. You can have them for $10 plus shipping, haha. |
Re: vid clips from today Dave, start working on a compilation of your own similar to this one, in stages, Click here. By the way, one of my buddies is bringing his Supra tomorrow night, add that to the list of races that I'm setting up for ya tomorrow night.... :D |
Re: vid clips from today
Originally Posted by Street Lethal By the way, one of my buddies is bringing his Supra tomorrow night.... |
Re: vid clips from today
Originally Posted by Street Lethal
(Post 3765313)
Tony won't be bringing the Supra tonight, he's running w/his Eclipse instead.... im not bringing anything but insanity !!!!!!!!!!!!!:lmao::lmao::crazy: |
Re: vid clips from today ^ You'll need that insanity, especially when Shawn's old TTA rolls up next to you tonight.... :nod: |
Re: vid clips from today lol whos driving shawns old tta? |
Re: vid clips from today ^ Some dude bought it a few months back. The car already had the potential to run deep into the 12's, so we shall see just how good of a driver the new owner is.... I can smell them from here.... :nod: https://static.flickr.com/48/139130633_2f6f325d6c.jpg |
Re: vid clips from today
Originally Posted by Street Lethal
(Post 3765383)
^ Some dude bought it a few months back. The car already had the potential to run deep into the 12's, so we shall see just how good of a driver the new owner is.... I can smell them from here.... :nod: http://static.flickr.com/48/139130633_2f6f325d6c.jpg |
Re: vid clips from today ^ Already got them, see you in about an hour.... :nod: |
Re: vid clips from today alright im just finishing up putting the camaro back together,no slicks tongiht need to do some body work(BFH) to get them to fit,****erds are rubbing the bump stops.so a lil persuasion with the 20# hammer will move them in but i just got done removing the old slicks with a slide hammer so i sure as hell dont feel like swinging around a 20# hammer now.lmao we really need a tire machine here |
Re: vid clips from today ^ Dude, not too big a fan of White Castle soda, where can I pick up some soda once I get in the general area (the gas station maybe?), cuz if I get it here, it'll get hot by the time I get there. Also, you be a coke man if i remember correctly, right....? :D |
Re: vid clips from today yup coke,umm the hess station down town has a mini mart |
Re: vid clips from today I'd like to make video's too but all i have is my cell phone to record video lol. wow @ those pics of Shawns car. A buddy of mine had the same exact car, he threw Hydraulics on it. http://a406.ac-images.myspacecdn.com...d1893ffcb5.jpg |
Re: vid clips from today ^ Shawn was having a little difficulty Friday night, running very rich on the top end and let off of it. Still ran a very respectable low 12 second pass, but that thing is easily a 10 second T-Type. He knows his Buicks.... :thumbsup: Why not come down one Friday night and hang out w/us....? |
All times are GMT -5. The time now is 11:56 PM. |
© 2024 MH Sub I, LLC dba Internet Brands