91 Camaro Intellitronix Gauges
Thread Starter
Junior Member
Joined: Jul 2017
Posts: 58
Likes: 15
From: Western New York
Car: 91 Z28
Engine: 305 TPI
Transmission: 5 Speed
Axle/Gears: G92 (3.42)
91 Camaro Intellitronix Gauges
Hi everyone,
After having my original gauge cluster burn and having trouble receiving my gauge cluster I ordered I really liked this digital cluster. Now I looked around on the forums and found some posts that were helpful but I think info is still lacking for the 91-92 clusters. I will try to add some helpful insight on my install but I was wondering if anyone could shed some light if they’ve attempted this themselves? Thanks for the help!
After having my original gauge cluster burn and having trouble receiving my gauge cluster I ordered I really liked this digital cluster. Now I looked around on the forums and found some posts that were helpful but I think info is still lacking for the 91-92 clusters. I will try to add some helpful insight on my install but I was wondering if anyone could shed some light if they’ve attempted this themselves? Thanks for the help!
Thread Starter
Junior Member
Joined: Jul 2017
Posts: 58
Likes: 15
From: Western New York
Car: 91 Z28
Engine: 305 TPI
Transmission: 5 Speed
Axle/Gears: G92 (3.42)
Re: 91 Camaro Intellitronix Gauges
I was trying to figure out how to wire the speedometer since there isn’t a cable in these cars so do you use the speed converter they send with the gauges?
Joined: Dec 2004
Posts: 16,737
Likes: 994
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: 91 Camaro Intellitronix Gauges
On the original cluster #1 is the vss signal from the ecm. If your instructions are vague give the company a call for tech support.
http://docs.wixstatic.com/ugd/6a4159...c4c1a34aa4.pdf
http://docs.wixstatic.com/ugd/6a4159...c4c1a34aa4.pdf
Last edited by Tuned Performance; Oct 4, 2017 at 04:28 PM.