I did an la swap. problem is I did what pocket told me not to do. I cut my old harness before everything was sorted. stereo works, console lights, everything basically works except the horn, heater. compressors not in, but not deleted. can someone help me fix this plz. it's getting cold down south. thanks wires from blower

 

Red wire gets full time power; Should have originally come from the starter post, thru a fusible link, and up to the cut wire shown in your picture.

Black wire is ground for the motor and the relay. Splice an "EYE" at the end of that wire & screw it to the body.

Blue wire: IIRC ( AKA = I THINK! ) is AC signal from the AC pressure switch. Double check to be sure !


So; connect power and ground, then try to turn on the blower.

 

thanks so much man. will do asap.