Ive decided to part out my 91 Camaro Vert. It was a northern car before I got it and did some rust repair, and its come back in many places. I don't have the time, money, desire to repair that and everything else that is wrong with it.

I do not have the ability to ship large items. You will need to meet me in public places for transfer(72120/72116). I do have a class I am to take for work on Oct 20/21'st and can not meet up them days. Otherwise, nights and weekends are good.

I do not know current values on this stuff. So please be fair. I do have a goal to meet, who knows if I will make it.


Engine and harness is NOT for sale. I hope I can get the time to drop it into another one of my many projects.

What its got.....
Koni front shocks (sold)
KYB AGX rear shocks (sold)
spohn strut mounts (sold)
spohn torque arm(sold)
unbalanced engineer panhard bar(sold)
LCA bolt on brackets (sold)
unknown brand heim joint tie rod ends (sold)
G80, 3.23, pbr disk rear axle. (sold)
black 4 gen seats (drivers seat ripped when pulling other parts )
black/gray vert interior.
prototype digital cluster(search my name on the brand) (sold)
pro 5.0/t5 shifter that's been shortened even more.(sold)
4th gen gas tank swap
wonderbar .(sold)
36 and a 34mm front swaybar (sold)
all sizes of rear swaybars (sold)
2 82/83 aluminum front crashbars (1 sold)
1 custom made rear aluminum crashbar
4th gen aluminum driveshaft (sold)
1 spare front nose (sold)
heim joint LCA's that need new heims
Jamex drop springs (sold)
stock dual fan setup (sold)
z28 grill (sold)
composite headlights with override headlight harness (sold)
clear side marker lights(sold)

body wise... doors, vert fenders, vert trunk, vert flip lid. I think I have a full set of the plastic bumper air scoops.

 

Work is sending me out of town, and I will be driving. I can bring parts with me. I am going to Bethany MO on sunday the 15th. So Fayetteville AR, Joplin MO, East Kansas City, and Bethany. I can bring along and meet you at exits along my path!!

 

How is the condition of the black plastic interior header trim panel piece. It's the piece inside by the windshield where the sun visors screw into. Let me know. Thanks. Shipping would be to Los Angeles.

 

Price on strut mounts and bolt on lower control arm brackets shipped to NC 28326.

 

How many miles are on those struts and springs?

 

92 trans am. Its cracked just to the right of the center.

ty92z. Hows 175 plus shipping? I don't know what the weight/price would be till I pull them off. spohn doesn't show weight of their parts.

black. The springs have been in for 10 years, I would guess 20-25k. Struts, 10-12k'ish?

 

PM'd

 

Thanks for checking!

 

ty92z, I never got a pm from you???

92TA, Thanks for looking!

 

Sorry man, I sent it again.

 

Pm sent

 

PM sent...

 

Sending pm

 

Center spoiler peice with 3rd brake light?

 

how much for shifter and tq arm to ny 12590

 

PM sent

 

Received strut mounts and LCARBs. Gave me a good deal and shipped super fast.

 

Back in town from work for a week.

Irocdrag, yes I have it. The spoiler is in great shape. The light works n holds. But its faded and the the clip that holds wire harness in is broke. But it still stays.

85iroc. I can not ship the torque arm, to big. Will have to be local sale. I had someone pm me on the shifter. Will need to see who posted/msg me first.

 

pm inbound

 

Irocdrag. I just noticed today one of the studs has unglued itself from the spoiler. I have the stud and it could be glued back on if you wish.

 

Got my shifter today great price fast shipping good guy to do business with

 

What's your price on the dash, Gauge cluster trim (don't need the gauge cluster), interior harness, Complete center console, lower dash panel (just above drivers knees), Hush panel (just above passenger's feet), lower shifter boot, Possibly the triple gauge pod and the A-pillar trim? Can you post some pics of those parts also? Very interested. Yes, I understand you said you didn't want to ship larger items, I recently had an interior fire in the 91 vert I've been building and this would be perfect. Have pity on me.

 

What type of wonderbar is it? Pics? Shipped to NC 28326? Should have asked with first round of parts, but overlooked it.

 

Tibo, I'm going to pm you so we can try and figure something out for you. Shipping in box's isn't going to work.

Ty92z. It was some company that had a version 2. I want to say TDS. I will see if its got a decal while pulling other parts tonight.

 

Ty92z, It is a TDS wonderbar.

 

Works for me, what's your price shipped to NC 28326?

 

sending pm

 

I am traveling back to Bethany MO again for work on Monday 11-13-17

I still have doors, trunk, flip lid, fenders, gas tank, driveshaft, fans. Almost full interior. I can bring any of it with me.

 

Do you still have the sway bars?

 

Yes, I still have all the swaybars. I see your from VA, I'm not sure I would beable to get a box to ship them in. Could possibly do grayhound buses if they still have freight shipping. Don't have to worry to much about damage and boxes then.

 

Looking for a complete set of black seatbelts. Still have them?

 

shaggyowl. Already sold.

 

How much for the front bumper lower shin? Ship to Los angels 90723

 

Already sold

 

looking for front seat belt parts-

Exit guide sleeves - both sides . It's the little black plastic sleeve-insert that goes around the belts and screws to the rear interior trim panel where the front belt comes out of the rear side compartment.

 

Tootie, I still have them and was getting ready to ebay them. Out of the 4 plastic parts, I'm thinking one of the screw holes is stripped, but on what part I don't rem. Will look tonight and get you pics.

 

thanks!

 

I found a box that I can ship the driveshaft in, or the fender spoiler parts.

 

Do you still have the steering wheel with the center button in the last picture? If so, how much shipped to Salisbury, NC 28147

 

I had sold the center button to another user. Steering wheel was melting.

Majority of the car has been scrapped. I kept most of the convertible parts, some of the interior plastics, and what suspension parts haven't sold. Will be making a new parts post after the holidays.

 

Darn! Alright, I'll keep an eye out for that new post, I might still need some more parts. I'm in need of one of those steering wheels in good shape. I don't really want to spend the money for a new one if I can avoid it, and I also don't really want to pay for the leather to be redone on a used one, and it doesn't help that those style wheels get snatched up. If you come across another let me know. I've got to get this hideous wheel out of my car and go back to factory.

 

Hello,
Do you have the following parts?
Driver Side Door Sill Black Plastic P/N F7003? Both sides are interchangeable. Mine is cracked in the center
Rear View Mirror with lamps manual P/N G3514?
Top Brow Trim Panel for the convertible top front P/N 150701? Mine is cracked in the center
Convertible Inner Header Molding P/N 14954? Attaches to the top portion of the windshield on the inside and has provisions for the sun visors to mount. Mine is cracked in the center
The Part Numbers I found in the Classic Industries Catalog C217X.

Kerry in Virginia Beach Virginia 23462.
I have family in Mena, Arkansas.

Go Hogs.

 

wootdog, sorry I never got notice of your post.

I think I have the mirror.
the part 150701, I might have the older version of it.

rest is broke in same place you mentioned, or I already trashed it.

 

How much for the fenders

 

I don't have the boxes top ship them. They are convertible specific if you are unaware. The right is a genuine one, left is homemade one. If you want to come fetch them, 75 for the pair.

 

Did these sell?

 

yes they did, I don't think I have any more seatbelt anything

 

Do you still have the weatherstrip and channel that goes on the passenger side of the top, that the top of the window goes up against?

 

I have the whole entire top still. I was trying to sell whole locally. Debating on piece parting out.

I have that channel, but the weatherstrip is ripped badly from not lowering the window before flipping the top.