Parting out 1991 Camaro RS in IOWA
Thread Starter
Joined: Oct 2002
Posts: 2,678
Likes: 1,267
From: In the paint booth!
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 4.86 Currie 9 inch
Re: Parting out 1991 Camaro RS in IOWA
The dash pad is junk. The cluster is in ok shape...not sure what you're looking for with the dash? The center console lid is in great shape as far as the pad itself is concerned. No cracks, etc. The INSIDE plastic part is cracked by the lever thing that goes into the console itself (like it got opened too far). I'd imagine the pad could be removed and put on a different lid.
Thread Starter
Joined: Oct 2002
Posts: 2,678
Likes: 1,267
From: In the paint booth!
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 4.86 Currie 9 inch
Re: Parting out 1991 Camaro RS in IOWA
The steering column seems fine, and I have one ignition key
EDIT-- I just checked out the steering column and it is in awesome shape cosmetically, but has wobble in it from pulling on the steering wheel to get out of the car. I know they can be tightened up. The turn signal lever is fine, as is the tilt lever
EDIT-- I just checked out the steering column and it is in awesome shape cosmetically, but has wobble in it from pulling on the steering wheel to get out of the car. I know they can be tightened up. The turn signal lever is fine, as is the tilt lever
Last edited by dagwood; Apr 30, 2018 at 06:30 PM.
Want a title? Post!
Joined: Mar 2013
Posts: 0
Likes: 0
From: Oklahoma
Car: 1991 RS Camaro
Engine: 3.1L
Transmission: Automatic
Re: Parting out 1991 Camaro RS in IOWA
How much for the steering column as well I will pay for the shipping to my address? I am in need of a column pretty bad
Thread Starter
Joined: Oct 2002
Posts: 2,678
Likes: 1,267
From: In the paint booth!
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 4.86 Currie 9 inch
Trending Topics
Thread Starter
Joined: Oct 2002
Posts: 2,678
Likes: 1,267
From: In the paint booth!
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 4.86 Currie 9 inch
Thread Starter
Joined: Oct 2002
Posts: 2,678
Likes: 1,267
From: In the paint booth!
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 4.86 Currie 9 inch
Thread Starter
Joined: Oct 2002
Posts: 2,678
Likes: 1,267
From: In the paint booth!
Car: 1986 Camaro Drag Car
Engine: 383 on Ethanol
Transmission: Automatic
Axle/Gears: 4.86 Currie 9 inch
Joined: Sep 2002
Posts: 1,098
Likes: 21
From: Melbourne Australia but from South Carolina
Car: 1991 Trans Am convertible
Engine: 305 TPI
Transmission: Auto
Re: Parting out 1991 Camaro RS in IOWA
Looking for the besel that covers the signal light stalk next to the steering shaft. It covers the wires.
Junior Member
iTrader: (1)
Joined: Oct 2009
Posts: 30
Likes: 1
From: Boise, ID
Car: 91 Z28 Conv.
Engine: 305
Transmission: 700r4 auto
Axle/Gears: 3.27 posi
Re: Parting out 1991 Camaro RS in IOWA
Do you still have the Factory Radio with the yellow buttons?
Last edited by rjdavis2001; Aug 1, 2018 at 03:24 PM. Reason: incorrect spelling
Thread
Thread Starter
Forum
Replies
Last Post









