When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hi Beth
Do you have a mirror for the passenger side visor? It is for a vert so it is the skinny one to fit curved visors.
Also I working set of horn buttons for a airbag wheel. My vert is a 91. Thanks
Do you have some original paperwork for the cars you parted? In particular, I'm looking for a dealer envelope labeled "Chevrolet Commitment to Excellence" (among some bowtie symbols).
Posting pics of what I have.
Originally Posted by yankeecarman
Looking for the besel that covers the turn signal stalk. It clips on to hide the wires underneath it. thanks. Car is a 1991 trans am.
I just finished tearing one down- let me see if it is still there.
Originally Posted by 86knightta
I'd need it shipped to ontario canada if you have one, but i need a good-great condition drivers gta seat track. Mine is rotten.
Power I am assuming?
Or is this the one that the front half of the seat adjusts?
I have several nice tracks, let me know a little more info.
I ship out of the country regularly, so that is not a problem.
Originally Posted by vinny R
Hi Beth
Do you have a mirror for the passenger side visor? It is for a vert so it is the skinny one to fit curved visors.
Also I working set of horn buttons for a airbag wheel. My vert is a 91. Thanks
I may have that mirror- let me check the stock.
And I am bringing home a 91 Z parts car today, so likely will have horn buttons then.
Not sure how to do quotes, yes the gta seat track i need is manual forward and back. Manual tilts the front up and down. From and 88 GTA. And a price shipped to K0E 1B0 ontario canada
ok thank you for your time/effort, I have another request, I have an 85 Z 28 & i am looking for the fog light wiring from dash switch, including dash switch, to the fog lights. I do no need the lights. Can you be on the look out for this for me & have a great day!!! I do believe I've purchased from you a few years ago when I had another 3rd gen. best wishes
OK I got a good one for ya... I need the inside hatch trim in black... for a rear wiper car. Let me know!
I do have the trim- don't remember the color.
Originally Posted by mrestrictrplate
Do you have a stock leather stitched z28 style shifter ball? I think 85 to 2002 used the same style.
Nothing there
Originally Posted by Lakerman62
ok thank you for your time/effort, I have another request, I have an 85 Z 28 & i am looking for the fog light wiring from dash switch, including dash switch, to the fog lights. I do no need the lights. Can you be on the look out for this for me & have a great day!!! I do believe I've purchased from you a few years ago when I had another 3rd gen. best wishes
I don't at the moment, I reduced a lot of stock when we moved to CO. If I get one I will get in touch with you first.
88 iroc shifter plate with built in shift indicator. Not cracked. Screws and retaining clip that holds plastic bezel on passenger side that covers wiring. We have the bezel
88 iroc shifter plate with built in shift indicator. Not cracked. Screws and retaining clip that holds plastic bezel on passenger side that covers wiring. We have the bezel
I have a shifter plate that is uncracked, but someone painted it red!
Are you talking about the under dash cover? If so, I have the hardware.
Originally Posted by popester82
And 88 iroc dash panel. Ours is sun fried and cracked.
Nothing good there.
Originally Posted by yankeecarman
Repost: I didnt get an answer to this. If you have it, it would be shipped to South Carolina. Please let me know. thanks.
Looking for the besel that covers the turn signal stalk. It clips on to hide the wires underneath it. thanks. Car is a 1991 trans am.
I'm sorry, I missed coming back to that. The turn signal stalk looks to be a one piece thing that goes all the way around. Right below it is a piece that snaps on. Which one is it? Pic attached.
Do you have a set of the plastic caps on the door panels that hold the window rubber for a 87 GTA? Mine are bowed and some jack-leg put screws in them.
Do you have a set of the plastic caps on the door panels that hold the window rubber for a 87 GTA? Mine are bowed and some jack-leg put screws in them.
The top trim rails? Let me see if I have a good set of them.
Originally Posted by yankeecarman
Hi Beth, I sent you a pm concerning our conversation. Ron
Ron here are pics of both styles. I believe the one on the left is the one you needed, but want to be sure.
Beth I think that is correct but I cant be sure. Mine has been missing for such a long time. It is for a 91 Trans Am. Does that help? I am happy with what you have quoted. I will sent the money right away. thanks so much. Ron
Beth I think that is correct but I cant be sure. Mine has been missing for such a long time. It is for a 91 Trans Am. Does that help? I am happy with what you have quoted. I will sent the money right away. thanks so much. Ron
If it's a 91, then, yes the smaller one is the correct one.
Originally Posted by jsr1485
Seat belts Grey for 1991 Firebird GTA Have any?
I do have a complete set- front buckles have the typical cracking. Do you need fronts, rears, or both?
Here are pics of the drivers side. Passenger is about the same condition,but is missing the little flap on the side that covers the bolts at the sill plate.
Let me know if you want one or both.
For those who don't know Beth - I've bought a LOT of parts from her and she is a stand up person for sure!
1000% true!! I've bought several things from her and they've been exactly what she has said and she has always gotten things out really quickly. She's very understanding as well!! Once I get to my interior, i'm sure that I will buy from her again!
Ok, guys I just got back into town- I left a week ago, and I will catch up on requests tomorrow.
I spent my trip to PA delivering sheet metal for third gens on the way.
Ok, guys I just got back into town- I left a week ago, and I will catch up on requests tomorrow.
I spent my trip to PA delivering sheet metal for third gens on the way.
Let me find them- I believe I still have a nice one.
Originally Posted by mmadden55
Turn signal stalk and some tail lights.
I should have a good one- with or without cruise.
Originally Posted by jworks
87 gta auto shift plate, power windows and power mirrors?
No I don't.
Originally Posted by Sdallaire
Do you have a rear bose speaker cover?
I do not.
Originally Posted by Go Blue
For those who don't know Beth - I've bought a LOT of parts from her and she is a stand up person for sure!
1000% true!! I've bought several things from her and they've been exactly what she has said and she has always gotten things out really quickly. She's very understanding as well!! Once I get to my interior, i'm sure that I will buy from her again!
Thank you for your kind words.
Originally Posted by FireBirdblooded
Do you have GTA notchback back seats?
I do not.
Originally Posted by sgeorges714
Shifter **** and emergency brake handle 87 camaro (auto). Thanks!
TThose I do have- shoot me a message if you are looking.
Originally Posted by FireBirdblooded
GTA Notchback back seats
No I don't
Originally Posted by x55Cam
Do you have a rear view mirror, the entire assembly?
Which style you looking for? I am assuming the one inside the car? I have the one with dual map lights, as well as the plain jane one.
Originally Posted by Sdallaire
I need the passenger front plastic track cover, on the door side.
I don't believe I have a good one, but I will check.
Originally Posted by gcj280
Do you have any old tachometers laying around? working or not.
Thanks! greg
What years you looking for? I may have some[/QUOTE]
82-92 camaros. In any condition really. I repair GM tachs and make new circuit boards for them. If you do have some, please give me a price for all. And any pics you might have of them.
I am looking for the leather wrapped, round pushbutton shifter ball/**** for a 1983 Z28. If you have one or know where I might get one, please let me know. Thanks