S.E.Region Members Rides!
Junior Member
Joined: Sep 2004
Posts: 16
Likes: 0
From: Mississippi
Car: '89 Camaro RS
Engine: 305 TBI
Transmission: T-5
Here's a pic of mine: '89 RS, 305 TBI, 5spd, blue with silver stripes, Iroc grid taillights, and new wheels since this pic was taken, it now sits on solid centerlines, with 295/50 15's on the back( since these were too much trouble when it came to taking them off). P.S. license plate reads :COP B8 (cop bait)
Junior Member
Joined: Sep 2004
Posts: 16
Likes: 0
From: Mississippi
Car: '89 Camaro RS
Engine: 305 TBI
Transmission: T-5
I'm in Potts Camp, GreatJ, it's about 45 minutes from Memphis on hwy 78. By the way, nice RS, I owned one the same year and color, mine was a hardtop, though. Had to sell it to pitch all my money into the '89 lol
Junior Member
Joined: Nov 2001
Posts: 58
Likes: 0
From: New Bern NC United States of America
Car: 1991 RS
Engine: Procharged LT1
Transmission: T56
Here is my 91. Procharged LT1/T56, chrome Y2Ks, 4th gen leather interior.
I have a 3" Cervini cowl for it but the car needs to be painted so I am waiting to do that before I put the hood on. I had a stainless mesh type grill on it but took it off earlier that day and didn't get to putting it back on.
I have a 3" Cervini cowl for it but the car needs to be painted so I am waiting to do that before I put the hood on. I had a stainless mesh type grill on it but took it off earlier that day and didn't get to putting it back on.
Last edited by slimdawson; Oct 2, 2004 at 01:16 PM.
Junior Member
Joined: Nov 2001
Posts: 58
Likes: 0
From: New Bern NC United States of America
Car: 1991 RS
Engine: Procharged LT1
Transmission: T56
Member
Joined: Jul 2003
Posts: 439
Likes: 0
From: Southern Illinois
Car: '89 rs convertible
Engine: ls1
Transmission: T56
Axle/Gears: 3.73 posi
Just wanted to remind everyone that if you're in the Middle Tennessee area , to come by and check out www.mtfba.org , you *might* recognize a certain admin there OR if you come by www.ls1tech.com , you might even recognize a certain moderator there , too! < shameless self -pimping mode off>
Senior Member
Joined: Feb 2005
Posts: 669
Likes: 1
From: Atlanta, GA
Car: 1982 - Z28
Engine: 350 / CCC Q-Jet
Transmission: THM-700R4
Axle/Gears: 10 Bolt - 3.73
Will get painted soon (hopefully)
Previously property of the Norcross Police Department - DRUG FORFEITURE
Purchased on E-Bay
Engine Replacement Just finished (sort-of)
See Engine Swap Forum.... thread:
"Unfortunate Engine Swap Victim - ADVICE PLEASE"
Peachtree City, Georgia
Purchased on E-Bay
Engine Replacement Just finished (sort-of)
See Engine Swap Forum.... thread:
"Unfortunate Engine Swap Victim - ADVICE PLEASE"
Peachtree City, Georgia
Senior Member
iTrader: (3)
Joined: Apr 2005
Posts: 890
Likes: 0
From: Hickory, NC
Car: 1991 Camaro RS, 1993 Camaro Z-28
Engine: what engine, LT1
Transmission: did it come with one, 4l60
Axle/Gears: They spin (most of the time)
Drag Racing...Morresville Dragway...Sept. 25th...bring your third gen down and race
Joined: Mar 2002
Posts: 587
Likes: 1
From: middle TENNESSEE
Car: 1989 Iroc rebuild
Engine: 355 carb'd
Transmission: 5spd
Axle/Gears: 3:08 pos for a while
woman
college girl pulled out of mini mart to cross 3 lanes traffic,i just happened to be in middle lane
Senior Member
Joined: Sep 2003
Posts: 797
Likes: 0
From: NC
Car: Camaro
Engine: 305
Transmission: 700r4
Axle/Gears: 3.73
HOLY **** DUDE! Sorry to hear it. SO did you get charged with murder or attempted murder?? I would have killed somebody for sure. Sorry about your car.
Senior Member
iTrader: (3)
Joined: Apr 2005
Posts: 890
Likes: 0
From: Hickory, NC
Car: 1991 Camaro RS, 1993 Camaro Z-28
Engine: what engine, LT1
Transmission: did it come with one, 4l60
Axle/Gears: They spin (most of the time)
Some girl decided she didnt like her lane and moved to me and my buddys lane and hit us head on a few months ago, it sucks!
Joined: Jun 2002
Posts: 13,576
Likes: 30
From: Harford County, MD
Car: camaro sportcoupe
Engine: 7.0L
Transmission: G-Force GF5R
Axle/Gears: Moser 9"
wow dude, that absolutelty blows. planning on another?
here is how my newest one started:
alittle cleaner next to the red car:
transformation begins:
here is how my newest one started:
alittle cleaner next to the red car:
transformation begins:
Joined: Mar 2002
Posts: 587
Likes: 1
From: middle TENNESSEE
Car: 1989 Iroc rebuild
Engine: 355 carb'd
Transmission: 5spd
Axle/Gears: 3:08 pos for a while
of course
here the one that is being looked at 4me if ophelia doesn't get them
Last edited by hwcoll95; Sep 14, 2005 at 08:07 PM.
Joined: Mar 2002
Posts: 587
Likes: 1
From: middle TENNESSEE
Car: 1989 Iroc rebuild
Engine: 355 carb'd
Transmission: 5spd
Axle/Gears: 3:08 pos for a while
never would have thought
in 6 days after an accident,my IROC would be totaled,under a tarp in the yard,and a '92 Heritage would be on it's way to me,just gonna take a week to get it 650miles to it's new home
Senior Member
iTrader: (3)
Joined: Apr 2005
Posts: 890
Likes: 0
From: Hickory, NC
Car: 1991 Camaro RS, 1993 Camaro Z-28
Engine: what engine, LT1
Transmission: did it come with one, 4l60
Axle/Gears: They spin (most of the time)
i was in Tenn. last weekend, i could have dropped it off for you, you know give it a little test drive...hehehe 
Supreme Member
iTrader: (2)
Joined: Mar 2005
Posts: 2,820
Likes: 5
From: East Tennesse
Car: 1991 RS Camaro
Engine: L03 (want LS1)
Transmission: 700R-4 (and T56)
Axle/Gears: 4th Gen 3.23 posi
Ok, 56k not recommended. I have cable, and that hurt. Here is my baby... http://www.cardomain.com/ride/2107531
Junior Member
Joined: Oct 2005
Posts: 55
Likes: 0
From: north carolina
Car: 04 Dodge SRT-4, 91 formula firebird
Engine: 2.4 L4, 305 tbi
Transmission: 5-speed, 700 r4
Originally posted by 1990GTA
Crane cam, Holley AFPR, Headman long tube ceramic coated headers, Comp Cams 1.6 roller tip rockers, Comp Cams pushrods, Cloyes double roller timing cain, ported and pollished plenum. Click on photo for more pics.
Crane cam, Holley AFPR, Headman long tube ceramic coated headers, Comp Cams 1.6 roller tip rockers, Comp Cams pushrods, Cloyes double roller timing cain, ported and pollished plenum. Click on photo for more pics.
Member
Joined: Jan 2005
Posts: 353
Likes: 19
From: Ft Myers, FL
Car: 92 Firebird Conv
Engine: 305
Transmission: T-56 w/3.42 Posi
Originally posted by formie95
Been a long time f-body fan and sold my 95 formula 4 years ago and have been missing it ever since. Until I found this in Daytona and had to get it. My f-body and I are back!
Been a long time f-body fan and sold my 95 formula 4 years ago and have been missing it ever since. Until I found this in Daytona and had to get it. My f-body and I are back!
Mine Now... He couldnt handle it...
One of the few proud Firebird Convertible owers in the S.E.now has 4th gen seats, camaro rims(for autocrossing), bigger rear sway bar, 4 wheel disk brakes(had rear drums before), will have tpi and new top, new paint job, and corvette zo6 rims soon
Last edited by Speedy Mike; Jan 18, 2006 at 11:15 AM.
Junior Member
Joined: Nov 2003
Posts: 71
Likes: 0
From: Enterprise, Alabama
Car: 86 Monte Carlo SS
Engine: 5.0 liter High Output w/ TPI
Transmission: built 700R4 Auto
Axle/Gears: 10 bolt 3.73
Here is my little cream puff!
She is a 1984 Auto Form Corp. Convertible with only 28K miles on her.
She is a 1984 Auto Form Corp. Convertible with only 28K miles on her.
Supreme Member
Joined: Jul 2005
Posts: 1,675
Likes: 3
From: Arab, Alabama
Car: 1988 Trans Am GTA
Engine: 350 4BBL
Transmission: 700R4
Axle/Gears: 3.27
Supreme Member
iTrader: (2)
Joined: Mar 2005
Posts: 2,820
Likes: 5
From: East Tennesse
Car: 1991 RS Camaro
Engine: L03 (want LS1)
Transmission: 700R-4 (and T56)
Axle/Gears: 4th Gen 3.23 posi
Ok, here are some pics of my baby.... (All of them before the Pro-Kits)
I need to respray the panhard bar.
I need to respray the panhard bar.
Junior Member
Joined: Nov 2005
Posts: 12
Likes: 0
From: chickamauga, Ga.
Car: chevy p/u: 85 Firebird
Engine: 383 stroker: 438
Transmission: 700r4 : Powerglide
Axle/Gears: 10 bolt 373; 9 inch 410
Junior Member
Joined: Sep 2006
Posts: 29
Likes: 0
From: Homestead, Florida
Car: 2005 Chevy Duramax, 83 Z-28
Engine: 408 SBC with Edlebrock Vic Jr Heads
Transmission: T350
Axle/Gears: custom 8.5, 4.56, spool, SSM
Here's my 83'. Getting ready to change the interior over to grey/black, paint the cage, new seats, fiberglass dash with covans insert, new carpet, and
MT 3 peice drag wheels with 295/65's n the rear.
MT 3 peice drag wheels with 295/65's n the rear.