Just wondering who has had good luck with an aftermarket torque arm bushing? I've heard some cause extra noise,I need an indestructible one without the noise.

------------------
'89 IROC-Z 350 TPI K&N,no screens,air foil,TB coolant bypass,AFPR@46#,MSD6a,Flowmaster,3.73's Best E.T. 14.60 @ 93 mph<(before 3.73's)

 

i am running an energy suspension polyurethane. It works fine and makes no noise.

 

I've got an ES one too.

------------------
West Coast GM Shootout 2001!
1991 Camaro Z28
5.7L 5-Speed (originally 305)
13.25 @ 107.18 MPH
Southern California
Member: SoCal 3rd Gen F-Bodies
Webmaster: SoCal F-Bodies
-=ICON Motorsports=-

 

I use the ES busshing too. Have no complaint about it.

 

Energy Suspension, works fine but not sure about noise, my car makes so much I have no idea if it's a contributor or not! :-)


------------------
'91 Z28 1LE; 355, Sportsman II heads, Edelbrock TPI w/ 58mm TB, Tremec TKO 5-speed, 3.73's & much, much more

 

Another one for E/S poly bushing... No complaints here, either. I do have a spare, cuz I ordered the wrong one, so if it's the one you need, I'll give you a good deal on it - less than you'd pay from Summit or someone else. I'll have to see which one it is, though, cuz I don't remember.

KAM

 

Mine is an ES also, no noise. They gave me a package of very sticky grease that I put on.. maybe the "squeaker" you heard about didn't use the grease?


------------------
-Tom P (Hot rodded 1986 Firebird 2.8l) from http://www.f-body.net/mailbag/3rd/3rd_mailbag.html message boards
---Think your car could be pic of the week? Visit http://www.f-body.net for details!