Which Parts if I Lower IROC 1inch?
Thread Starter
Member
Joined: Nov 2000
Posts: 490
Likes: 0
From: Mt. Home, ID
Car: 1986 IROC
Engine: 305 going to 355
Transmission: 700R4
Which Parts if I Lower IROC 1inch?
I am thinking of getting the Hotchkis "Performance Spring Set" P/N 1903 and they have a one inch drop. Will I have to get an adjustabletorque arm and adjustable LCA's with the relocation brackets? All opinions requested.
Mark
------------------
1986 IROC LG4 "Bone Stock" (for now)
Mark
------------------
1986 IROC LG4 "Bone Stock" (for now)
no you don't need torque arms or lca's when you lower a car; not for an inch or any height, you will need to get a re-alignment for your wheels though..... personally i would save for the eibach's if i were you. they have a nicer ride.
now depending on the angle of your rear you might want an adjustable panhard rod to make things even, but not for a 1 inch lowering
[This message has been edited by Kandied91z (edited September 18, 2001).]
now depending on the angle of your rear you might want an adjustable panhard rod to make things even, but not for a 1 inch lowering
[This message has been edited by Kandied91z (edited September 18, 2001).]
Thread
Thread Starter
Forum
Replies
Last Post
mustangman65_79
Body
3
Aug 11, 2015 03:17 PM
