Need Your Help
Thread Starter
Junior Member
Joined: Oct 2005
Posts: 3
Likes: 0
From: Hesperia Ca
Car: S 10 4x4
Engine: v6 2.8
Transmission: Stock
Need Your Help
Hello All I'm new here, I've got a **COUGH** ThirdGen with a TBI V6.
It's not a V8 5.0 or anything I just want to pull some legal horse out of my **COUGH** car ..... I'm not sure if this is the right site for the help I need please let me know, I did buy a Holly TBI.... anyone know what I can get or do?
It's not a V8 5.0 or anything I just want to pull some legal horse out of my **COUGH** car ..... I'm not sure if this is the right site for the help I need please let me know, I did buy a Holly TBI.... anyone know what I can get or do?
Last edited by 90RS305; Oct 22, 2005 at 04:18 AM.
Supreme Member
iTrader: (7)
Joined: Aug 2005
Posts: 1,068
Likes: 1
From: Ohio, near columbus
Car: 89 iroc-z
Engine: 305tpi
Transmission: wc-t5
Axle/Gears: 10 bolt 3.08 posi (4 now)
This realy isn't the spot for it but, freeflowing exhaust would help along with a set of headers and an aftermarket cam and head porting job, and you could have a motor to compete with my little 305 as it sits now i'm sure. G/l with it.
Last edited by flaming-ford; Oct 22, 2005 at 08:12 AM.
Supreme Member
Joined: Apr 2003
Posts: 2,070
Likes: 0
From: Tempe, Arizona
Car: 96 Silverado/99 Suburban
Engine: 700 cubic inches of 'Muican Awesome
Transmission: 4L80/4L60
Axle/Gears: Chunky/Clunky
Umm.....I edited a couple of "grammer mistakes" out of your post, cuz we all know you have a thirdgen (wink). Welcome Home 
Supreme Member
Joined: Feb 2002
Posts: 2,663
Likes: 9
From: Buckhannon, WV
Car: 84' Monte
Engine: 350
Transmission: 700-r4
Axle/Gears: ferd 9" posi 3.50 gears
When it comes to actuall TBI info, this is the best place on the net. You'll quickly learn that TBI will respond to all the old hot rod tricks of easy in and easy out. You'll also find that if you want to unlock the full potential of your TB motor you need to become friends with your ECM. Do some searches on datalogging, and DIY chip burning. There is a whole board dedicated to DIY chip buring. Start with the stickies and read till your cross eyed.