Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!

Sponsored by:

Help!!

Reply Subscribe

Search this Thread

Old

May 15, 2002 | 10:09 PM

#1

Thread Starter

Senior Member

Joined: Dec 2001

Posts: 568

Likes: 0

From: Chandler AZ

Help!!

I just installed World S/R Torquer 305 heads, with a ZZ4 cam ( 208/221 .474/.512 @ .05 I think those are the specs) and an edelbrock intake manifold. This is on a 305 TBI 92 rs. NOW MY CAR WON'T START!! Installed the distributer at TDC. Pops through intake. So any and all help will be apericated.

Old

May 15, 2002 | 10:13 PM

#2

Supreme Member

Joined: Jan 2001

Posts: 7,164

Likes: 1

From: Someone owes me 10,000 posts

Car: 99 Formula

Engine: LS1

Transmission: T56

Axle/Gears: 342

Sounds like the timing is way off.

Old

May 15, 2002 | 10:31 PM

#3

Thread Starter

Senior Member

Joined: Dec 2001

Posts: 568

Likes: 0

From: Chandler AZ

Thanks for the reply.

I will recheck it tomarow, but what else could cause this.

Old

May 16, 2002 | 08:58 PM

#4

Thread Starter

Senior Member

Joined: Dec 2001

Posts: 568

Likes: 0

From: Chandler AZ

Found the problem, we installed the distributer on the exhast stroke. Runs fine now.

Old

May 16, 2002 | 09:58 PM

#5

Thread Starter

Senior Member

Joined: Dec 2001

Posts: 568

Likes: 0

From: Chandler AZ

Does anyone have any opinions on what I should set my base timing at?

Reply Subscribe

First
Prev
1 / 1
Next
Last

All times are GMT -5. The time now is 05:36 AM.