I don't know where to post this but, it is basically for my eng. so......


well, I don't know what to call them but flapper wheel sounds good to me, they look like little wheels made up of flat strips of sand papper. they sell small ones in the hardware stores for the dremel tools and the ones I want I have only seen at swap meets (1"-2 3/4") well I want to get some so if any one knows were to get them let me know

 

Standard Abrasives sells them. 2 of them come in their porting kits, but they are only like 1" and 120 grit.

 

Actually flapper wheels are what they are called.

We also carry them at sears.

 

try northern hydraulics or harbour freight tools, they should have some....

 

A larger auto parts store will carry them, too.

 

McMaster-Carr would have them, and most likely cheaper. check out their site.

 

thanks alot! I checked out standard abrasives and found some a little on the high side . I will check in to the others you guys listed but, if all else fails thats were I will get them.