68cc chamber AFR heads and domed pistons
Thread Starter
Junior Member
Joined: Dec 2002
Posts: 10
Likes: 0
68cc chamber AFR heads and domed pistons
I am trying to find out if any one else is using domed pistons with the 68cc chamber AFR heads, and what pistons they used and if the pistons or combustion chamber needed to be modified.
When I built mine I ended up using the Keith Black hyperutectic KB-119 with a 0.1 dome 1970 LT1 replacement piston. I had to remove a slight amount of material from the combustion chamber on the intake side, I am sure it was less than 0.5cc's.
When I built mine I ended up using the Keith Black hyperutectic KB-119 with a 0.1 dome 1970 LT1 replacement piston. I had to remove a slight amount of material from the combustion chamber on the intake side, I am sure it was less than 0.5cc's.
Thread
Thread Starter
Forum
Replies
Last Post
evilstuie
Tech / General Engine
22
Jan 9, 2020 08:29 PM
C409
Engine/Drivetrain/Suspension Parts for Sale
5
Sep 23, 2015 04:30 PM
Mickeyruder
Engine/Drivetrain/Suspension Parts for Sale
3
Sep 2, 2015 02:45 PM
