Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

NOT fuel pump?

Old Feb 17, 2003 | 08:47 PM
  #1  
mattRS's Avatar
Thread Starter
Member
20 Year Member
 
Joined: Jan 2002
Posts: 398
Likes: 0
From: Plano, TX
NOT fuel pump?

a few days ago my fuel system started to screw up. you know how when you are low on gas and turn, it starts boggin? it does that every once in a while now, when im goin straight. happens all the way from 1-80 mph. i have enough pressure in my tank that when i take off the gascap it gives a whoosh noise. also, i changed the filter and put in cleaner a few days ago. i was told i might need a pressure regulator rebuild kit. by the way, its TBI. what do yall think?
Reply
Old Feb 17, 2003 | 10:03 PM
  #2  
Vader's Avatar
Moderator
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2000
Posts: 19,668
Likes: 314
Matt,

The first thing I would do is to perform a fuel pressure test. The test can identify whether the problem is fuel related at all, and whether is is the pump or regulator. On a TBI engine, you'll need to install an adapter to provide a test fitting. Normal fuel pressure should be betewen 11-13 PSIG.
Reply
Old Feb 18, 2003 | 12:18 AM
  #3  
mattRS's Avatar
Thread Starter
Member
20 Year Member
 
Joined: Jan 2002
Posts: 398
Likes: 0
From: Plano, TX
i am guessing if the FP is fine before it hits the TB, its the regulator?
Reply
Old Feb 18, 2003 | 07:51 AM
  #4  
Vader's Avatar
Moderator
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2000
Posts: 19,668
Likes: 314
Matt,

If the fuel pressure is low, it will be low through the entire system. The only exception to that would be in the case of a clogged filter, where the pressure differential across the filter would cause lower pressure at the TB and regulator. The regulator is an integral part of the system, and if it doesn't control the pressure correctly, pressure will be low both at the pump and TB. Conversely, if the pump cannot produce adequate pressure, the regulator cannot raise or "regulate up" that pressure.

The first thing to do is get an accurate measurement of the pressure. If the pressure is lower than it should be, you then need to determine the cause. If the pressure is indeed low, you can crimp the fuel return line from the regulator to determine if the regulator is leaking through, or if the pump cannot produce adequate pressure. With the regulator return line crimped closed, the pump should be able to produce at least 30 PSIG. If the system pressure does not increase with the regulator return line closed, the pump is suspect.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Glowsock
Tech / General Engine
13
Jul 24, 2025 03:15 PM
92camaroJoe
TBI
32
Jul 29, 2023 07:57 PM
RazorN8
Tech / General Engine
4
Jan 7, 2022 11:44 AM
beachrodder
Tech / General Engine
7
Aug 25, 2015 08:05 AM
92camaroJoe
Tech / General Engine
6
Aug 13, 2015 06:07 AM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 03:32 AM.