Worse after new spark wires...
Thread Starter
Member
Joined: Jan 2003
Posts: 272
Likes: 0
From: Arcata, California
Worse after new spark wires...
I thought I was very careful to install them one wire at a time...
Anyway the car ran rough to begin with, and I thought replacingthe old wires was a good bet considering they were all burned and stuff. Now it runs worse.
Could it just be my ECM needs to be reset? Or more likely I nucked fup with the wire order?
Btw they are accell 8mm's, the already built kind.
Anyway the car ran rough to begin with, and I thought replacingthe old wires was a good bet considering they were all burned and stuff. Now it runs worse.
Could it just be my ECM needs to be reset? Or more likely I nucked fup with the wire order?
Btw they are accell 8mm's, the already built kind.
Supreme Member
Joined: Jan 2000
Posts: 1,301
Likes: 1
From: Panama City Beach,Florida
Car: 1989 Camaro
Engine: 406
Transmission: Pro-built 700R4
If its worse after the wire install and thats the only change you made, chances are there is a plug wire crossed somewhere. Double check the wiring.
Thread
Thread Starter
Forum
Replies
Last Post
HoosierinWA
Tech / General Engine
5
Oct 7, 2015 10:15 AM