PNs for mini-starter?
Thread Starter
Member
Joined: Dec 2001
Posts: 260
Likes: 0
From: Burnaby, BC, Canada
Car: 1989 Formula 350
Engine: 5.7L (L98)
Transmission: 700R4
PNs for mini-starter?
My starter is on its way out and I wanted to price some mini-starters to replace it. If anyone could help me out with some brands and part numbers, that'd be great. Are they all a simple bolt in? Or are there some things I should avoid/watch out for/be aware of?
Supreme Member
Joined: Mar 2002
Posts: 1,654
Likes: 2
From: Lower Salford, PA
Car: 1987 Camaro Z-28
Engine: 6.3L Victor EFI
Transmission: Tremec TKO 600
Axle/Gears: Moser 9"/4.11 Trac-Lok
Got mine on ebay. Bolted right on, you just have to know if you have a 12.75" (153 tooth) or 14" (168 tooth) flywheel/flexplate.
Member
Joined: Jan 2003
Posts: 144
Likes: 0
From: Louisville, Kentucky
Car: 1991 Camaro Z28
Engine: TPI 350
Transmission: 700R-4
This is the starter I have...have not had a problem yet.
http://www.jegs.com/cgi-bin/ncommerc...56&prmenbr=361
http://www.jegs.com/cgi-bin/ncommerc...56&prmenbr=361
Thread
Thread Starter
Forum
Replies
Last Post