Valley baffle for roller cam??
Thread Starter
TGO Supporter
Joined: Jul 2003
Posts: 4,803
Likes: 2
From: Grand Rapids, MI
Car: Z28
Engine: Sb2.2 406
Transmission: Jerico 4 speed
Axle/Gears: Ford 9" 3.60
Valley baffle for roller cam??
I am in the midst of compsing an x-mas list (and an engine rebuild
) and cam accross the idea of a valley baffle. Looking on summit, they show that they have them. however, they are not compatable with roller lifters/roller cams. are there any baffles that are roller-compatable or is there any way to make a valley baffle roller compatable??
) and cam accross the idea of a valley baffle. Looking on summit, they show that they have them. however, they are not compatable with roller lifters/roller cams. are there any baffles that are roller-compatable or is there any way to make a valley baffle roller compatable?? 
Thread Starter
TGO Supporter
Joined: Jul 2003
Posts: 4,803
Likes: 2
From: Grand Rapids, MI
Car: Z28
Engine: Sb2.2 406
Transmission: Jerico 4 speed
Axle/Gears: Ford 9" 3.60
sweet...thanks
any block modification to do this? what parts do i throw in there instead of the big spider thing? like what about this part. though it says it goes only through the years 87-94:
http://store.summitracing.com/partde...LP%2DHT%2D2148
any block modification to do this? what parts do i throw in there instead of the big spider thing? like what about this part. though it says it goes only through the years 87-94:
http://store.summitracing.com/partde...LP%2DHT%2D2148
Last edited by Stekman; Dec 1, 2003 at 12:47 PM.
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Something tells me they don't have that picture right. "OEM replacement" would not have a bar connecting pairs.
Thread Starter
TGO Supporter
Joined: Jul 2003
Posts: 4,803
Likes: 2
From: Grand Rapids, MI
Car: Z28
Engine: Sb2.2 406
Transmission: Jerico 4 speed
Axle/Gears: Ford 9" 3.60
thats what i originally thought, but now i dont know what to think. anyone have a proper part number?
Joined: Mar 2000
Posts: 43,187
Likes: 42
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Try http://store.summitracing.com/partde...CCA%2D818%2D16 or http://store.summitracing.com/partde...N%2D11532%2D16 .
Note the Crane picture is wrong, too (that's Summit's fault, not the manufacturers).
Note the Crane picture is wrong, too (that's Summit's fault, not the manufacturers).
Thread
Thread Starter
Forum
Replies
Last Post
Hotrodboba400
Firebirds for Sale
3
Dec 10, 2019 07:07 PM
