Fuel pump failure
Thread Starter
Junior Member
Joined: Sep 2003
Posts: 10
Likes: 0
From: San Diego
Car: 92 CAMARO RS
Engine: 305 TBI
Transmission: 700
Fuel pump failure
Has anyone here ever cut the sheet metal insted of dropping exhaust,suspension, track bar,and tank just toget to the fuel pump?
Joined: Mar 2000
Posts: 43,187
Likes: 43
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
Too many have.
Of course, you'll have those who will try to defend the action.
Do it right and drop the tank.
Of course, you'll have those who will try to defend the action.
Do it right and drop the tank.
Junior Member
Joined: Apr 2003
Posts: 18
Likes: 0
From: Ann Arbor, MI
if you drop the tank, you will spend hours of your time being pissed off at the stupid thing, because it will not come out!!!!!
just cut the stupid hole and be careful..... its very much worth it...if you manage to cut the fuel lines on the top of the tank while cutting the hole..no worries, just patch it with some rubber tube and hose clamps.
just cut the stupid hole and be careful..... its very much worth it...if you manage to cut the fuel lines on the top of the tank while cutting the hole..no worries, just patch it with some rubber tube and hose clamps.
Member
Joined: Oct 2001
Posts: 253
Likes: 0
From: Kissimmee,FL/Pennsauken,nj
Car: 85 z28
Engine: 305 TPI
Transmission: 700R4
i cut a door shaped cut out and u have to cut the fuel lines and buy fuel line hose and samll clamps fist time will take alil long about 2 hours but beats a whole day under the car all day
Thread
Thread Starter
Forum
Replies
Last Post
beachrodder
Tech / General Engine
7
Aug 25, 2015 08:05 AM
92camaroJoe
Tech / General Engine
6
Aug 13, 2015 06:07 AM