I would like to know which type of holley you would recomend for my set up.....350, flat top pistons 10:1 compression, .480 gross lift cam, edlebrock rpm inake manifold,ported polished heads 2.02 1.60 valves, matted to a th350, and 3:73 gears in the rear. any more info needed?

 

I would go 650 or 600. That would give you great performance from 0-6000 rpm. Joe

 

n make sure your shooters are decent size and your power valve is above 7.

thats a nice set-up minus the edelbrock intake =]

 

what series holley would you guys use. 4150, dp, etc.?