Pushrod sizes??
Thread Starter
Member
iTrader: (5)
Joined: Mar 2003
Posts: 409
Likes: 0
From: Cali
Car: '85 Camaro
Engine: LS1
Transmission: T56
Axle/Gears: 3.73
Pushrod sizes??
Ok now i need to buy the little things for my engine to almost complete it. I just got AFR 195 heads and going to be going with 1.5 ratio roller rockers but how do i determine which length and thickness i need to go with? Im going to be getting some heavy duty ones its just the sizes im not to sure on. Any help i would appreciate. thanks
Supreme Member
Joined: Apr 2001
Posts: 4,969
Likes: 0
From: USA
Car: yy wife, crazy.
Engine: 350, Vortecs, 650DP
Transmission: TH-350
Axle/Gears: 8.5", 3.42
5/16" or 3/8" is the diameter you want depending on what will fit the heads and guidplates.
To find the length you need an adjustable pushrod. You can find one at a place like www.Jegs.com or www.SummitRacing.com
To find the length you need an adjustable pushrod. You can find one at a place like www.Jegs.com or www.SummitRacing.com
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
May 17, 2020 10:44 AM
LiquidBlue
Wheels and Tires
32
Dec 10, 2019 04:06 PM