What lubricant to apply on T5 splined input shaft
Thread Starter
Member
Joined: Nov 1999
Posts: 268
Likes: 0
From: Hopewell Jct., N.Y.
Car: 84 Z28 Camaro
Engine: 350ci
Transmission: T-5
What lubricant to apply on T5 splined input shaft
New motor goes in over the next week and wanted to know what to put on the T5 trans
imput shaft. I would imagine you should not
apply to much or it will end up on the
disc/pressure plate surface.
------------------
Tom K.
84 Z-28 M5 305 L69 HO
pulleys,coil,3:73(stock)
Jet chip, fan switch,
Al dshaft,1.6 rockers,
LCAs and brackets,BFG DRs
14.20 @ 96.74 2.02 60ft
imput shaft. I would imagine you should not
apply to much or it will end up on the
disc/pressure plate surface.
------------------
Tom K.
84 Z-28 M5 305 L69 HO
pulleys,coil,3:73(stock)
Jet chip, fan switch,
Al dshaft,1.6 rockers,
LCAs and brackets,BFG DRs
14.20 @ 96.74 2.02 60ft
Supreme Member
Joined: Jul 1999
Posts: 18,457
Likes: 16
From: Loveland, OH, US
Car: 4
Engine: 6
Transmission: 5
Right, just a light smear of some sort of grease; synthetic, or white lithium, or moly, or other high-quality non-fiber stuff.
------------------
"So many Mustangs, so little time..."
ICON Motorsports
------------------
"So many Mustangs, so little time..."
ICON Motorsports
Thread
Thread Starter
Forum
Replies
Last Post
Kingtal0n
Transmissions and Drivetrain
46
Aug 11, 2017 02:51 PM
a73camaro
Transmissions and Drivetrain
2
Nov 22, 2002 12:09 PM
