You asked for them, you got them! I (stupidly) posted them in my original thread (with comments). It's a thread called "Miniram can't make torque? Says who?" I started a few weeks ago.

Sorry.

An internet genius I'm not.

Hope you find it informative and, "real world"- proof, not just theory.

 

Good numbers. I saw the dyno graph and the hp is kinda low. With less cubes I made 487rwtq at 2800rpm and 325rwhp at 5300. All that with a superram and a few etra $ in my pocket for the cost of the miniram over the superram.

Drew

 

We have to get this thing on a DynoJet to have "comparable" numbers. The Mustang Dyno is a totally different beast.

These runs were made with the restrictive factory intake system in place which was restrictive even on the original 225HP TPI motor. On the 400 it's choking the life out of it. That's gonna be an easy 15-20HP on the top end and a maybe even a little torque down low, too.

Believe this: it's an easy 400HP engine at the flywheel. I've built and diriven a lot of cars and this thing is an honest mid-high 12 second car on street tires.