Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

can you test to see if a block heater is working?

Old Feb 18, 2006 | 11:00 AM
  #1  
IROC_5796's Avatar
Thread Starter
Senior Member
20 Year Member
 
Joined: Sep 2002
Posts: 613
Likes: 0
From: Canada winnipeg
Car: '91 vert RS, '82 Z28
Engine: TBI 305, TPI 350
Transmission: Auto, 5 speed
can you test to see if a block heater is working?

cant tell if my block heater is working, is there a way to test it? maybe with a voltmeter or somthing. does anyone know?
Reply
Old Feb 18, 2006 | 11:53 AM
  #2  
SSC's Avatar
SSC
Supreme Member
20 Year Member
 
Joined: Jul 2001
Posts: 3,974
Likes: 0
From: Pueblo Co
Car: 1989 C4
Engine: L98
Transmission: 700r4
Axle/Gears: 307
Well just for safety sake dont test the plug. After being plugged in all night you can feel the area around the heater and if it doesent feel warm to the touch then it isnt working.
Reply
Old Feb 18, 2006 | 11:57 AM
  #3  
IROC_5796's Avatar
Thread Starter
Senior Member
20 Year Member
 
Joined: Sep 2002
Posts: 613
Likes: 0
From: Canada winnipeg
Car: '91 vert RS, '82 Z28
Engine: TBI 305, TPI 350
Transmission: Auto, 5 speed
well i was thinking to do a continuity test or resistance so it wouldnt be pluged in to power just to see if the circuit is broken but im not sure what it will come up with if i do a resistance test, i called midas they wanted 50 bux to check it.

its not really warm to the touch but its not cold either, and its been hitten -40c here. my other car will burn your hand if you touch it.
Reply
Old Feb 18, 2006 | 12:11 PM
  #4  
Vader's Avatar
Moderator
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2000
Posts: 19,659
Likes: 310
What type of heater? I've had the best luck and longevity with the tank type installed in the heater hoses. You should be able to test the resistance of the heater. There should be about 2 ohms (DC resistance, not impedance), possibly less.

Good thing it's only -40°C, and not -40°F.
Reply
Old Feb 18, 2006 | 12:17 PM
  #5  
IROC_5796's Avatar
Thread Starter
Senior Member
20 Year Member
 
Joined: Sep 2002
Posts: 613
Likes: 0
From: Canada winnipeg
Car: '91 vert RS, '82 Z28
Engine: TBI 305, TPI 350
Transmission: Auto, 5 speed
its a block style heater goes where the frost plug is, i was told not to use the inline antifreeze heaters becuase they can actually catch fire. its so frikken cold here i dont even want to go back outside to see if its warmed up yet
Reply
Old Feb 18, 2006 | 01:37 PM
  #6  
Vader's Avatar
Moderator
25 Year Member
Liked
Loved
Community Favorite
 
Joined: Jan 2000
Posts: 19,659
Likes: 310
I've never had that experience. Most if not all the tank-type heaters I've had included a thermostat that would shut down at a given temperature for safety/energy conservation. There's nothing quite like having warm coolant as soon as the engine starts running. With the warm coolant being pumped/percolated through the block and heads, starting is very easy since ring friction is about like on a 70°F day.

I've seen a lot of the freeze plug type heaters leak, too.

Either way, you may be able to "test" the heater operation without going out in the fresh air. Wherever you have the cord plugged in, you can unplug it and test the resistance there. You may even see an arc when you unplug it. That should be a clue that some current is being drawn.

Of course, it seldom gets that cold down here. About as low as I've ever had to use a heater was -42°F in the northwoods of Wisconsin, and that's pretty rare. It was a tank-type as well.
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Jake_92RS
Tech / General Engine
8
Jan 28, 2020 10:37 PM
sweet_87_iroc
Exterior Parts for Sale
7
Mar 27, 2016 04:05 PM
TheExaminer
Cooling
26
Aug 26, 2015 04:59 PM
lakeffect2
Cooling
11
Aug 23, 2015 08:44 AM
Cheibu70
Interior Parts Wanted
3
Aug 15, 2015 12:11 PM


Thread Tools
Search this Thread

All times are GMT -5. The time now is 11:08 AM.