didnt know where else to post this so thought here would be a good place i went to ACE hardware cause they can cut VATS keys to find the resistance of my key to bypass the lock cyl. and they told me it was number 7 soooooo i went and searched all over this is what i came up with

1 = no longer used = 392
2 = CN = 523
3 = FW = 681
4 = GP = 887
5 = KA = 1130
6 = N5 = 1470
7 = UN = 1870
8 = XB = 2370
9 = GA = 3010
10 = NP = 3740
11 = FY = 4750
12 = C5 = 6040
13 = XY = 7500
14 = KB = 9530
15 = UW = 11800

hope this helps other people out

 

I'll add to that and raise you this..for those making a by-pass this comes in handy.
1 ...402(386-438)
2 ...523(502-564)
3 ...681(650-728)
4 ...887(850-942)
5 ...1130(1085-1195)
6 ...1470(1411-1549)
7 ...1870(1795-1965)
8 ...2370(2275-2485)
9 ...3010(2890-3150)
10 ...3740(3590-3910)
11 ...4750(4650-4960)
12 ...6040(5798-6302)
13 ...7500(7200-7820)
14 ...9530(9149-9931)
15 ...11800(11328-12292)
those are the acceptable ranges that each will take..Think the web site needs to post this?