explain this to me
Thread Starter
Joined: Jul 1999
Posts: 12,093
Likes: 126
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
explain this to me
I've got an engine infront of me. Look at the casting number on the top of the belhousing, left side (sitting in vehicle)> says.
GM
3982
Which doesn't come back to ANYTHING.
Anyone ever seen a 4 digit one before?
Trying to determine if it's a 350 w/out yanking the heads off.
-- Joe
GM
3982
Which doesn't come back to ANYTHING.
Anyone ever seen a 4 digit one before?
Trying to determine if it's a 350 w/out yanking the heads off.
-- Joe
Thread Starter
Joined: Jul 1999
Posts: 12,093
Likes: 126
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Moderator
Joined: Jan 2000
Posts: 20,981
Likes: 11
From: Mercedes Norte, Heredia, Costa Rica
Car: 1984 Z28 Hardtop
Engine: 383 Carb
Transmission: 4L60
Axle/Gears: 3.54 Dana 44
Re: explain this to me
If it's original paint, then it's a late 70s-1982 block. 3892657 was the casting number of the 67 302/327/350 blocks, though.
Thread Starter
Joined: Jul 1999
Posts: 12,093
Likes: 126
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: explain this to me
Thread Starter
Joined: Jul 1999
Posts: 12,093
Likes: 126
From: SALEM, NH
Car: '88 Formula
Engine: LC9
Transmission: 4L60E
Axle/Gears: 3.89 9"
Re: explain this to me
Ok, The number on the front of the block is:
V0925UC
Now Assuming "UC" is the suffix code, it comes up as a 1969 307..?
The heads are 462624, which should be late 70s 305 heads.
Whatcha think?
-- Joe
V0925UC
Now Assuming "UC" is the suffix code, it comes up as a 1969 307..?
The heads are 462624, which should be late 70s 305 heads.
Whatcha think?
-- Joe
Senior Member
Joined: May 2005
Posts: 777
Likes: 1
From: Windsor Ontario Canada
Car: 89 jaguar xjs convertable
Engine: 89 L98 5.7 TPI
Transmission: 700R4
Axle/Gears: 3.23 dana 44
Re: explain this to me
I think ya got a turd on your hands! But a 307 would have been orange.
Thread
Thread Starter
Forum
Replies
Last Post
Pac J
Tech / General Engine
3
May 17, 2020 10:44 AM





