hp question
Thread Starter
Junior Member
Joined: Oct 2007
Posts: 13
Likes: 0
hp question
i got a l03 (305 tbi) short block with:
14014416 heads (58cc ,1.84/1.5)
edelbrock performer intake
edelbrock performer 750 cfm carb
comp cams hydraulic roller cam shaft (480/487 lift 258/264 duration)
700r4 tranny
any guesses at hp?
14014416 heads (58cc ,1.84/1.5)
edelbrock performer intake
edelbrock performer 750 cfm carb
comp cams hydraulic roller cam shaft (480/487 lift 258/264 duration)
700r4 tranny
any guesses at hp?
Joined: Mar 2000
Posts: 43,187
Likes: 45
From: Littleton, CO USA
Car: 82 Berlinetta/57 Bel Air
Engine: L92/LQ4 (both w/4" stroke)
Transmission: 4L80E/4L80E
Axle/Gears: 12B-3.73/9"-3.89
About 275 flywheel gross.
Why the large carb?
And, why an Edelbrock?
Why the large carb?
And, why an Edelbrock?
Thread Starter
Junior Member
Joined: Oct 2007
Posts: 13
Likes: 0
Re: hp question
i got it cheap off my dad for a 383 i was buildiing...., would i be better off to pick up a holley 600 or something ...., what do you suggest ....., im open to any constructive advice
Thread
Thread Starter
Forum
Replies
Last Post
