Tech / General Engine Is your car making a strange sound or won't start? Thinking of adding power with a new combination? Need other technical information or engine specific advice? Don't see another board for your problem? Post it here!
Sponsored by:
Sponsored by: CARiD

Please help new to this

Old Jul 30, 2008 | 05:22 PM
  #1  
bcfipp's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2008
Posts: 102
Likes: 0
Please help new to this

What is the correct position for the timing on a 1991 z28 305 fuel Injected. The problem is the car wants to stall when i go from park to reverse and drive. Any information will help greatly thanks
Reply
Old Jul 30, 2008 | 06:35 PM
  #2  
jpeden31's Avatar
Junior Member
 
Joined: Apr 2008
Posts: 90
Likes: 0
From: Bailey, Co 8300ft
Car: 1984 z-28
Engine: 305H.O. L69
Transmission: 700r4
Axle/Gears: 3.73 G80 GT4
Re: Please help new to this

6° btdc

with engine running disconnect the bypass, its a connector near the heater/ac blower box
then set the timing then plug it back in
Reply
Old Jul 31, 2008 | 09:35 AM
  #3  
bcfipp's Avatar
Thread Starter
Member
iTrader: (1)
 
Joined: Jul 2008
Posts: 102
Likes: 0
Re: Please help new to this

Thanks I appreciate the help.
Reply


Thread Tools
Search this Thread

All times are GMT -5. The time now is 05:45 PM.