Head question
Thread Starter
Junior Member
Joined: May 2007
Posts: 19
Likes: 0
Head question
Hey guys i have an 86 TPI camaro. 305. What size are the rocker arm studs. I've found a set of 1.6 roller tipped rockers for 25 bucks. they are used but only for a few months. All i will have to buy are the poly locks.
Thanks Guys.
Thanks Guys.
Supreme Member
iTrader: (1)
Joined: Jul 2004
Posts: 10,763
Likes: 4
From: Calgary, AB, Canada
Car: 1982 Trans-Am
Engine: 355 w/ ported 416s
Transmission: T10, hurst shifter
Axle/Gears: 10 bolt, true-trac, 3.73
Re: Head question
3/8"
what you want might not fit under your stock rocker arms.
why would you need poly locks? re-use the stock nuts
what you want might not fit under your stock rocker arms.
why would you need poly locks? re-use the stock nuts
Thread Starter
Junior Member
Joined: May 2007
Posts: 19
Likes: 0
Re: Head question
Do you mean stock valve covers? i looked at them and the stock nuts wont go down inside. it takes the longer polylocks. Thats what the guy was running anyway. he's keeping them for another project.
Thread
Thread Starter
Forum
Replies
Last Post
NinjaNife
Tech / General Engine
27
Aug 23, 2015 11:49 AM