215cc motown or 195cc something else
06-26-2009 | 06:30 PM
#1
Thread Starter
Member
Joined: Jan 2006
Posts: 348
Likes: 0
From: So.MD
Car: 92rs
Engine: 350
Transmission: 350
Axle/Gears: 3.73/Moser 12bolt
215cc motown or 195cc something else
That is the ? , here is the info.
357ci
stock 202 heads 72cc
Doug Herbert camshaft part#c4c
solid lifter
int. 235 @.050
exh.245@.050
500/500 lift
108lsa
Holley 750 DP
mech. sec.
approx.9.5:1 (per prev. owner)with steel shims
I've been looking at Bill Mitchell's cnc'd 215cc heads,64cc,w/1:6 rockers.
Anyone have experience with B.M. and would this be a good combo.
Strip/street car in that order.Looking for low 12's maybe better.
Thanks in advance
357ci
stock 202 heads 72cc
Doug Herbert camshaft part#c4c
solid lifter
int. 235 @.050
exh.245@.050
500/500 lift
108lsa
Holley 750 DP
mech. sec.
approx.9.5:1 (per prev. owner)with steel shims
I've been looking at Bill Mitchell's cnc'd 215cc heads,64cc,w/1:6 rockers.
Anyone have experience with B.M. and would this be a good combo.
Strip/street car in that order.Looking for low 12's maybe better.
Thanks in advance
07-01-2009 | 12:46 AM
#2
Member
iTrader: (1)
Joined: Nov 2003
Posts: 412
Likes: 1
From: TX
Car: 1984 Firebird SE
Engine: 388 sbc, Brodix Track 1s
Transmission: turbo 350 transmission
Axle/Gears: 4.10 gears
Re: 215cc motown or 195cc something else
With that compression, I would look for around the 190-195 cc heads with 64cc not 72 cc.Also, your cam maybe a little small and may like the addition of 1.6 rockers instead of 1,5.
Thread
Thread Starter
Forum
Replies
Last Post
355tpipickup
Alternative Port EFI Intakes
3
08-29-2015 10:47 PM
