Help. Trying to get idle set
Thread Starter
Senior Member
Joined: Sep 2008
Posts: 278
Likes: 0
From: Minnesota
Car: 89 IROC Z28 Vert
Engine: 305 TPI
Help. Trying to get idle set
Hey all
i was wondering if anyone had any tips on dialing in the idle speed. I have tried adjusting the TPS and IAC, but neither really helped. When i start the car sometimes it ides good but when i put it into gear the rpm's drop to about 600 which is fine. but then it starts to lope up and down until it settles again.
89 iroc 305 TPI
i was wondering if anyone had any tips on dialing in the idle speed. I have tried adjusting the TPS and IAC, but neither really helped. When i start the car sometimes it ides good but when i put it into gear the rpm's drop to about 600 which is fine. but then it starts to lope up and down until it settles again.
89 iroc 305 TPI
Thread
Thread Starter
Forum
Replies
Last Post
backtothe80s
Suspension and Chassis
33
Sep 5, 2015 12:39 AM
red90IROCls1
Transmissions and Drivetrain
10
Aug 25, 2015 06:56 AM