Priming my 92 3.1L camaro rs. Doing this via the distributor hole, via the oil pump shaft. All of the push rods have oil coming out of them except, #3 intake, #5 intake and exhaust. What is the correct procedure to prime the engine? I have turned the engine with my ratchet to different positions, but still no oil comes out to those push rods. I also had the push rods out and I know that they are clear. Why won't the oil come out of those push rods? I have a 5/16 inch socket and extensions connected to the oil pump shaft. I am turning the oil pump shaft with my 3/8 drill.