Which can to choose?
Thread Starter
Junior Member
Joined: Mar 2012
Posts: 18
Likes: 0
From: St Petersburg FL
Car: 92 Camaro RS
Engine: 305 TBI
Axle/Gears: Formally 3.08/ Now 3.73 Posi
Which can to choose?
Ok so I'm rebuilding a 350 and it's a roller. So I'm wandering which is the best can for hp and the best sounding?
Thread Starter
Junior Member
Joined: Mar 2012
Posts: 18
Likes: 0
From: St Petersburg FL
Car: 92 Camaro RS
Engine: 305 TBI
Axle/Gears: Formally 3.08/ Now 3.73 Posi
Re: Which can to choose?
sorry buddy but no thanks way to big of a lift for my car trying to stay under .500 lift powerband on that cam is way to much for mine. Im looking for a cam range 2000-6000 powerband
Junior Member
Joined: Jan 2012
Posts: 40
Likes: 0
From: GA
Car: 1992 Camaro RS
Engine: 305 TBI
Transmission: 700R4
Re: Which can to choose?
Honestly, for a street car, I would look harder at 1500-5000 RPM, as that's where you will spend most of your time, with emphasis on the lower end. Most people don't get that it is smarter to give up 10-15HP on the top end for 20-30 FT/LB's on the bottom end.
Thread
Thread Starter
Forum
Replies
Last Post
ElPaleterro85
Body
2
Aug 13, 2015 03:49 PM
Scott 88 GTA
Aftermarket Product Review
2
Oct 30, 2000 12:34 PM