vortec spring question
Thread Starter
Supreme Member
iTrader: (6)
Joined: Aug 2009
Posts: 3,670
Likes: 3
From: Elwood, IN
Car: 1986 camaro Sports Coupe
Engine: L31 350
Transmission: 89 700R4
Axle/Gears: 3.42 gov lock
vortec spring question
well on my build for now i went ahead and bought a 95 lt1 cam for my vortec build up, since the original cam is around the same size as the lt1 cam i just installed, can i resuse the stock valve springs now?
Stock cam specs were .414/428 lift and .191/.196 duration
95 lt1 cam specs are 205/207 duration and .447/.459 lift.
Stock cam specs were .414/428 lift and .191/.196 duration
95 lt1 cam specs are 205/207 duration and .447/.459 lift.
Supreme Member
iTrader: (1)
Joined: Aug 2007
Posts: 1,390
Likes: 0
From: Bright, IN
Car: '86 Bird, 96 ImpalaSS, 98 C1500XCab
Engine: LG4, LT1, L31
Transmission: 700R4, 4L60E, 4L60E
Axle/Gears: 3.73 Tors, 4.88 spool, 3.73 Eaton
Re: vortec spring question
Nope, not unless you want to limit your rpm to about 5000.
I'd get this kit: http://www.alexsparts.com/valve-spri...rf-hyd-roller/
I'd get this kit: http://www.alexsparts.com/valve-spri...rf-hyd-roller/
Thread Starter
Supreme Member
iTrader: (6)
Joined: Aug 2009
Posts: 3,670
Likes: 3
From: Elwood, IN
Car: 1986 camaro Sports Coupe
Engine: L31 350
Transmission: 89 700R4
Axle/Gears: 3.42 gov lock
Re: vortec spring question
Nope, not unless you want to limit your rpm to about 5000.
I'd get this kit: http://www.alexsparts.com/valve-spri...rf-hyd-roller/
I'd get this kit: http://www.alexsparts.com/valve-spri...rf-hyd-roller/
Thread
Thread Starter
Forum
Replies
Last Post
84z96L31vortec
Tech / General Engine
7
Aug 20, 2017 12:16 AM
84z96L31vortec
North East Region
1
Aug 10, 2015 08:27 PM
