EGR Delete
Thread Starter
Junior Member
Joined: Jun 2017
Posts: 22
Likes: 0
From: Middleburg, Virginia
Car: 1987 Firebird Trans Am
Transmission: 700R4
EGR Delete
So I'm in the middle of installing an Edelbrock 1406... I know that many people think Rochester is better and I agree but I already bought it and that was my mistake. So when installing it I realized the EGR valve blocked off the linkage on the Edelbrock carb. I bought an EGR valve block off plate and installed that. What else do I need to do to EGR system so that I do not have any other problems?
Joined: Feb 2017
Posts: 4,174
Likes: 569
From: Meriden, CT 06451
Car: 84 TA orig. 305 LG4 "H" E4ME
Engine: 334 SBC - stroked 305 M4ME Q-Jet
Transmission: upgraded 700R4 3200 stall
Axle/Gears: 10bolt 4.10 Posi w Lakewood TA Bars
Re: EGR Delete
Disconnect the vacuum line from where it connects to the ERG solenoid and plug it with a vacuum cap.
Joined: Dec 2004
Posts: 16,774
Likes: 1,002
From: Mile High Country !!!
Car: 1967 Camaro, 91 z28
Engine: Lb9
Transmission: M20
Axle/Gears: J65 pbr on stock posi 10bolt
Re: EGR Delete
A block off plate will block the exhaust and the vacuum port.